355 with TH350 for sale

[madmalibu]

I'm selling my 355 and TH350 to make way for a 406 and 200R4. The tranny is mostly stock with a shift kit, adjustable module, and 3000 stall convertor. It shifts HARD, It will also come with a B&M ratchet shifter. The motor only has about 2500 miles on it. I only drive it once in a while. It's a 4 bolt main from a 74 truck. I had the crank cut .010 under, reconditioned pink rods, cast flat tops, motor was bored .030 over. New HV oil pump, spot welded pick up, new oil pan, new balancer, new double roller timing set, performer RPM cam, new lifters and springs, new full 1.5 roller rockers, new 882 heds heavily ported, milled, new 2.02 stainless valves, performer RPM intake, HEI distributor with performance module advance kit and coil, new plugs and wires, nice valve covers, new water pump. Everything is new. The only thing I'm keeping is my carb, but I have a performer 750 you can take with it, it will run ok, but probably needs to be cleaned. I built it last year and is in the car running right now. I'm on Long Island, New York about 50 miles from NYC. If you're interested contact me by e-mail at chevymalibu@optonline.net. I'm looking to get about $1600 for everything. Bolt on your exhaust and go.