I have bought some new heads for my 383 project. I had purchased a set of flat top hyperutectics, but Ill be running 11.24ish to one static comprestion, which I feel is a bit on the high side. I could always run 110 Aviation gas but its a bit on the expensive side 
I was thinking I would try to get a set of forged 16cc dish pistons. Anyone have a particular piston brand they think is better? The heads I am running are a set of 1985-87 L98 aluminums with 2.02/1.6 valves, port and chamber work(57cc chamber). The Intake system being used is an accel Super Ram. I havent decided on a Cam yet to compliment the heads but, I'd take some suggestions. I am also using 1 5/8" headman headers coated in and out.
I was thinking I would try to get a set of forged 16cc dish pistons. Anyone have a particular piston brand they think is better? The heads I am running are a set of 1985-87 L98 aluminums with 2.02/1.6 valves, port and chamber work(57cc chamber). The Intake system being used is an accel Super Ram. I havent decided on a Cam yet to compliment the heads but, I'd take some suggestions. I am also using 1 5/8" headman headers coated in and out.