I'm looking at some different sets of headers for the GN. I was going to go with ATR, but since they've gone out of business, I'm stuck looking at other sources. Currently, the offering from Hooker is my most likely candidate (coated and only $550 from Summit). However, I stumbled across a set from TA Performance. They offer theirs in 3 different variations...mild steel, coated mild steel and stainless. If I were to get their stainless set, would I still need to get them coated? I'm so confused lol
Announcement
Collapse
No announcement yet.
Header material
Collapse
X
-
Header material
Steve
79 FSJ - most expensive AMC Jeep ever Mods
87 GN - its just a 6... Mods
93 Z28 - slightly tweaked Mods
http://home.comcast.net/~budlopez
Tags: None
-
Wow, didn't even know Poston made headers. Pretty good setup, huh? Do they come with the crossover and/or downpipe?
And, just for kicks, which would be the better of those 3 choices I posted? The stainless?
Thanks Joe. You da manSteve
79 FSJ - most expensive AMC Jeep ever Mods
87 GN - its just a 6... Mods
93 Z28 - slightly tweaked Mods
http://home.comcast.net/~budlopez
Comment
-
Originally posted by Joe 1320The header design on these cars isn't quite as critical. The dyno tests of headers that I remember had them all with a few HP of each other. That's why I chose Poston's..... it also comes with a great high flow Y pipe.Steve
79 FSJ - most expensive AMC Jeep ever Mods
87 GN - its just a 6... Mods
93 Z28 - slightly tweaked Mods
http://home.comcast.net/~budlopez
Comment
-
Originally posted by Joe 1320I should have called it a crossover pipe. The factory one is squashed and flows terrible.Steve
79 FSJ - most expensive AMC Jeep ever Mods
87 GN - its just a 6... Mods
93 Z28 - slightly tweaked Mods
http://home.comcast.net/~budlopez
Comment
-
Wow!!!! Those look great. Heck, they look brand new still.
Is the cross-over a 1-piece or 2-piece unit? How big is it? Care to buy me a set? lolSteve
79 FSJ - most expensive AMC Jeep ever Mods
87 GN - its just a 6... Mods
93 Z28 - slightly tweaked Mods
http://home.comcast.net/~budlopez
Comment
-
Originally posted by Joe 1320It's a two piece slip fit, I think 2.25"....... can't remember exactly. It's bigger and better flowing than the stocker. I'll look it up when I get out of work.Steve
79 FSJ - most expensive AMC Jeep ever Mods
87 GN - its just a 6... Mods
93 Z28 - slightly tweaked Mods
http://home.comcast.net/~budlopez
Comment
Comment