Announcement

Collapse
No announcement yet.

LT1 Water pump, 3.42 gears, diff., valve covers

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • LT1 Water pump, 3.42 gears, diff., valve covers

    First off, GM 3.42 gears and a 3-series Auburn differential 7 5/8 10-bolt. (off of a 96 T/A) These have less than 19K on them and where pulled to upgrade. As you can see, they have NO surface rust as they were stored in a oiled bag. If you look close, you can still see the factory cross-hatch on the ring gear...that's how new these things are. I changed the diff. fluid (per GM) at 750 miles, and used synthetic. I then changed the fluid at 10K, and finally pulled it at 19K. (I change my diff. fluid every 10K out of habit...just because).

    I'm looking for $160 for both. If I have to separate, it'll be $115 for the diff., $70 for the gears. Once again...these things are factory fresh! Shipping will be extra, of course.






    Next up is a used but otherwise great condition LT1 water pump. It was NOT leaking when pulled. I'm in the process of completely rebuilding my car, so I'm buying everything brand new. The pump has 40K on it, and is in great shape, both inside and out. The rear bearing turns smoothly, and the weep hole is bone dry. In hindsight, I probably could have cleaned this up and saved myself a lot of money...but oh well, already bought a brand spanking new one. My lose is your gain. Would like $50 (+ shipping). SOLD





    And finally (for now) a stock set of LT1 (Firebird) valve covers. Nothing special...just nice clean covers. I upgraded to fully polished ones, so I don't need these. They come with the hardware, just add your favorite gasket (I like the blue Fel-pro personally). Looking for $25. SOLD (+ shipping).



    My screen name is Al 96 Ram Air T/A (use the same name on every board). If you know me, I am anal beyond belief when it comes to my cars. I take better care of my car than I do myself (LOL) so all parts I sell are in tip-top shape...satisfaction guaranteed!

    I have many other parts, but need to get them "photo ready".
    Al 96 Ram Air T/A
    Mods: Build # 784 * Hotchkis STB * SFCs * Borla cat back w/QTP cut-out * AS&M/RK Sports Mid-length headers w/single CAT * Koni SA shocks on lower perch w/ lowered rear * Strano Hollow front & rear antisway bars * 1LE front/rear springs * 1LE aluminum driveshaft * Strange 4.10 gears w/ Zexel Torsen diff. * ARP bearing cap studs & aluminum diff cover* J&M Hotpart poly/poly rear LCAs and poly/poly panhard bar * RAM Powergrip clutch w/ LT4 PP and RAM billet Al flywheel * C5 Z06 brakes * C6 Z06 wheels * Spohn T/A * Spohn DS Loop * fully custom interior w/ custom audio

  • #2
    Update...TTT.
    Al 96 Ram Air T/A
    Mods: Build # 784 * Hotchkis STB * SFCs * Borla cat back w/QTP cut-out * AS&M/RK Sports Mid-length headers w/single CAT * Koni SA shocks on lower perch w/ lowered rear * Strano Hollow front & rear antisway bars * 1LE front/rear springs * 1LE aluminum driveshaft * Strange 4.10 gears w/ Zexel Torsen diff. * ARP bearing cap studs & aluminum diff cover* J&M Hotpart poly/poly rear LCAs and poly/poly panhard bar * RAM Powergrip clutch w/ LT4 PP and RAM billet Al flywheel * C5 Z06 brakes * C6 Z06 wheels * Spohn T/A * Spohn DS Loop * fully custom interior w/ custom audio

    Comment


    • #3
      All Parts have been sold.
      Al 96 Ram Air T/A
      Mods: Build # 784 * Hotchkis STB * SFCs * Borla cat back w/QTP cut-out * AS&M/RK Sports Mid-length headers w/single CAT * Koni SA shocks on lower perch w/ lowered rear * Strano Hollow front & rear antisway bars * 1LE front/rear springs * 1LE aluminum driveshaft * Strange 4.10 gears w/ Zexel Torsen diff. * ARP bearing cap studs & aluminum diff cover* J&M Hotpart poly/poly rear LCAs and poly/poly panhard bar * RAM Powergrip clutch w/ LT4 PP and RAM billet Al flywheel * C5 Z06 brakes * C6 Z06 wheels * Spohn T/A * Spohn DS Loop * fully custom interior w/ custom audio

      Comment

      Working...
      X