Announcement

Collapse
No announcement yet.

Fully ported LT4 intake

Collapse
X
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous Next
  • #1

    Fully ported LT4 intake

    I paid $550 for the intake and porting. I will sell for $425 OBO. I am going to use a sheetmetal intake instead. The intake is brand new and has never been used. The throttle bores have been modified to accept a 58mm throttle body. Additional work has been done to the inside of the intake as well.





    Tags: None
  • #2
    two questions. in the picture the heads are shown as well. are they included and will this fit an LT1??
    '94 Z Patriot Red M6. 355 with forged crank; pistons; and hardened arms; AI heads; Custom cam; Cloyes true roller rocker timing chain; crane coil; Accell 36 lb injectors; B&M ripper; AS&M 58mm TB; Jet Hot Long Tubes; Spec Stage 3 clutch; 3" catback with Flowmaster; CSI elec water pump; vented opti; poly mounts on motor and trans; custom valve covers; 160 degree themo; high volume oil pump; K&N Air induction http://www.cardomain.com/ride/577474/1

    Comment

    • #3
      The heads are not included and without significant modification to your LT1 heads, this LT4 intake manifold will not fit. They are the same bolt pattern, but the intake runner on your LT1 heads are too low for the LT4 intake.

      Comment

      • #4
        OK Thanks anyway!
        '94 Z Patriot Red M6. 355 with forged crank; pistons; and hardened arms; AI heads; Custom cam; Cloyes true roller rocker timing chain; crane coil; Accell 36 lb injectors; B&M ripper; AS&M 58mm TB; Jet Hot Long Tubes; Spec Stage 3 clutch; 3" catback with Flowmaster; CSI elec water pump; vented opti; poly mounts on motor and trans; custom valve covers; 160 degree themo; high volume oil pump; K&N Air induction http://www.cardomain.com/ride/577474/1

        Comment

        • #5
          No problem.

          Comment

          • #6
            Besides the LT4 intake, what else would I need to complete my LT1 to an LT4? I'm interested.
            Hercules



            2008 Sunburst Metallic HHR LT

            Comment

            • #7
              Originally posted by DJ Taso
              Besides the LT4 intake, what else would I need to complete my LT1 to an LT4? I'm interested.
              As long as you have LT4 heads, this intake will fit right up!

              Comment

              • #8
                Just to let you know I have this throttle body for sale also which was the LT4 intake was port matched for.

                http://www.f-body.com/forum/showthre...hlight=arizona

                I will make you a deal if you want both.

                Comment

                • #9
                  bump

                  Comment

                  Previous Next
                  Working...
                  X