94 z28 supercharged LT-1
I have a 94 Z-28 w\ about 450 hp, I am having probs getting traction. Can anyone give me first-hand experience help?
Capncrunch
Capncrunch
-
-
Do you have any suspension mods? Is it an manual or automatic?
Start out with lower control arm relocation brackets with subframe connectors and an adjustable torque arm. That will help alot and increase the overall feel of the car.Tracy
2002 C5 M6 Convertible
1994 Z28 M6 Convertible
Current Mods:
SLP Ultra-Z functional ramair, SS Spoiler, STB, SFCs, Headers, Clutch, Bilstein Shocks, and TB Airfoil. 17x9 SS rims with Goodyear tires, 160F T-Stat, MSD Blaster Coil, Taylor wires, Hurst billet shifter, Borla catback with QTP e-cutout, Tuned PCM, 1LE Swaybars, 1LE driveshaft, ES bushings, White gauges, C5 front brakes, !CAGS, Bose/Soundstream audio, CST leather interior, synthetic fluids
-
An adjustable panhard rod and good rubber doesn't hurt as well
black 95 t/a, a4, beefed up tranny w/ higher stall converter, transgo shift kit, trans temp gauge, trans cooler, richmond 3.73's, loudmouth, hypertech programmer, 160 thermo, descreened maf, TB bypass and airfoil, trick flow intake elbow, underdrive pulleys, moroso cai, edelbrock panhard rod, bmr stb, slp sfc's, fiberglass firehawk hood, hawk pads, taylor wires, ngk plugs, royal purple fluids,...and hopefully more to comeComment
-
I'm assuming Tracy is implying to also replace your LCAs if you haven't already with an aftermarket set. Stiffer springs and shocks will also help, as will a bigger rear sway bar or an airbag in the pass. rear spring. And since these guys didn't do it, welcome to the board.
A bunch of knuckleheads these guys are lol 
Steve
79 FSJ - most expensive AMC Jeep ever
Mods
87 GN - its just a 6...
Mods
93 Z28 - slightly tweaked
Mods
http://home.comcast.net/~budlopez
Comment
-
Drag radials - oh and throw in a new rear end if it is an M6
Silver 02 WS-6, 6 speed, Corsa cat-back, SLP lid, K&N filter, BMR STB, !CAGs, Lou's short stick, MSD wires, MTI "Hammer" cam, ASP underdrive pulley, Hooker LTs, Hooker ORY, Comp 918s, TR pushrods, UMI Sfcs, UMI LCAs, NGK TR55s, Hotchkis springs
Dyno'd 4/24: 330.9 RWHP/ 344.8 RWTQ (Before cam, headers, and pulley)
Dyno'd 5/1: 383.5 RWHP / 380.5 RWTQ (393 actual RWHP)Comment
Comment