Announcement

Collapse
No announcement yet.

shifting gears

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • shifting gears

    when i'm at the drag stip and my car shifts into 3rd gear at about 70 mph it makes a strange noise. the first time i heard it i thought it was my tires chirping (i wish, it's stock). After i thought about it for i while i think it might sound like metal on metal. Anyways, when it happens it feels like it looses a whole lot of power for just a fraction of a second. does anybody know what it could be and if it's a bad thing? (my car is an automatic)
    1993 Formula - 99k
    Throttle body bypass, K&N FIPK II, SLP Loudmouth, Mad Z28 Chip, 3.73 motives, TPI airfoil, Spohn LCA relocation brackets, Fuddle 3200 Stall, B&M Supercooler, LS1 driveshaft, and chrome ZR1's 17"/9.5" and 17/11" in the back!!!

  • #2
    there have to be clutch discs somewhere. whether converter or trans.
    http://www.sounddomain.com/id/magnetheadz28

    Kenwood Krc-335(soon to be HU)]
    Kenwood Kdc-c669 (soon to be cd changer)
    Lanzar Vibe 418 (subwoofer amp)
    Lanzar Vibe 218 (6x9 amp)
    Subwoofers: bazooka EL1204

    Comment


    • #3
      Are you sure it's not belt slip? A common f-body problem is the accessories have a hard time slowing down on a gear shift, the belt gets worked pretty hard and may screech. One way to find out is to remove the belt and take a quick trip down the block and see if that is the culprit. Don't try to drive far, the battery won't get recharged. If it is the belt, clean all the pulleys really well and try a new belt. Also check the range gauge on the tensioner. The arrow molded into the case should point between the two hash marks on the base. If that is too loose, that can cause the problem as well.

      Comment

      Working...
      X