Announcement

Collapse
No announcement yet.

How rare is the F1 Camaro?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How rare is the F1 Camaro?

    If I'm not mistaken the F1 Camaro is a supercharged LT1 Camaros that LPE made right? I was just wondering how rare are these cars and what is their value say compared to an average Z28 or SS?
    1995 Camaro Z28 Convertible.

  • #2
    There is a GM Performance Parts F1 Camaro package that is basically some bolt-on trim items that were sold through the dealer, shipped loose and either dealer or owner installed. The same concept was used for the "GT" Firebird.

    From the 4th Gen FAQ:
    Q: What's included in the F1-Camaro/Firebird-GT package?

    A: This is a package available through most dealerships. It offers a variety of performance and cosmetic parts from the GM Performance Group. The following is a list of the parts for the F1-Camaro (and for the Firebird-GT) and can be ordered for your Z28 or Formula through your dealership:

    Part No. Description
    -------------------------------------------------------------------------
    12363906 32mm front stab. bar, bushings, link kit, and track bar
    12364002 17"x9"x50mm ZR-1 style wheels with P275/40ZR-17 Comp T/A tires
    12363998 16"x8"x66mm ZR-1 style wheels with P245/50ZR-16 Comp T/A tires
    12363902 6-speed Hurst shifter (leather wrapped shift knob)
    12363925 cat-back performance exhaust (dual single-side outlet)
    12363940 3 piece rear spoiler (primed)
    12363915 4 piece ground effects package (primed)
    12363978 cold air induction package (1993, for use with MAP)
    12363979 cold air induction package (1994 and up, for use with MAF)
    12363910 F1 Specialty Vehicle Package - everything above (1993)
    12363911 F1 Specialty Vehicle Package - everything above (1994 and up)
    123638xx coup floor mats (xx is 94-graphite, 95-gray, 96-beige, 97-neutral)
    123638xx conv floor mats (xx is 98-graphite, 99-gray, 00-beige, 01-neutral)
    Fred

    381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor

    Comment

    Working...
    X