Announcement

Collapse
No announcement yet.

Performace specs???

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Performace specs???

    Any websites out their that fully outline performance specs for the WS6 and for Magnaflow exhaust systems...

    I checked the Magnaflow website for performace specs, but it didnt have any... I want to know exactly what that exhaust is doing for my car... other than making it sound like the sky is falling

  • #2
    What do you mean performance specs? Hp gains over stock? Flow rate? Size in diameter? I believe the WS6 exhaust is simply a stock V8 exhaust with a WS6 "high flow" muffler. The biggest restriction in the exhaust is the intermediate pipe, which is roughly 2.75". Magnaflow and most other catbacks are 3", which is where you want to start. Gains of an aftermarket system over a stock WS6 system will probably be around 10 RWHP. Check out http://www.ws6.com/mycar.htm
    94 Black T/A GT, Advanced Induction 355, 3200 stall, built 4L60E, Moser 9", Baer Brakes, Shooting for 11s...

    Comment


    • #3
      Yea, I was looking for difference in comparisons as opposed to a stock exhaust and a performance magnaflow... and also just generalized performance specs on the W6 ... from drive train, to tourque, to gear ratio's ... etc

      Comment


      • #4
        If you want detailed specs, you can go here: http://www.f-body.org/tech/
        Just as a short summary, you have: 1 of 2827 '97 T/A WS6s.
        305 hp @ 5200
        335 tq @ 2400

        I don't know if it's listed there, but a rough estimate of acceleration times are:
        0-60 roughly mid 5 seconds, and 1/4 mile ET is around 13.8-14.2 @ 99-101.
        94 Black T/A GT, Advanced Induction 355, 3200 stall, built 4L60E, Moser 9", Baer Brakes, Shooting for 11s...

        Comment

        Working...
        X