I'm sure some of you have seen this but if not, check out the camaro concept:
1967 Camaro SS (real ss), All origional body and glass, no rust, New (12,000miles) 350 boared out .40, New heads, Comp Cams rocker arms, 270 cam (comp cam), holly 650 on an edelbrock RPM Air Gap manifold, pushing 400hp to the flywheel and 330hp to the tires, Headers, flowmaster 3 inch exhaus, front disc, heater/ac, Muncie 4 speed rockcrusher, 10 bolt with 3.05 UHHHHH and a 1993 Toyota pickup 4 banger , 4x4 of course
dang i didnt realize teh pics were old. either way I like it as well
1967 Camaro SS (real ss), All origional body and glass, no rust, New (12,000miles) 350 boared out .40, New heads, Comp Cams rocker arms, 270 cam (comp cam), holly 650 on an edelbrock RPM Air Gap manifold, pushing 400hp to the flywheel and 330hp to the tires, Headers, flowmaster 3 inch exhaus, front disc, heater/ac, Muncie 4 speed rockcrusher, 10 bolt with 3.05 UHHHHH and a 1993 Toyota pickup 4 banger , 4x4 of course
Cool, yes, but not too likely. Hopefully we'll be seeing the light at the end of the tunnel shortly. It's been said that if you want to see the future you should "really, really, really" go to NAIAS in 2006.
Joe K.
'11 BMW 328i
'10 Matrix S AWD
Previously: '89 Plymouth Sundance Turbo, '98 Camaro V6, '96 Camaro Z28, '99 Camaro Z28, '04 Grand Prix GTP
yea im sure we've seen them b4 but we always enjoy seeing them again lol.... i wouldnt mind it looking like that last pic (the 1967 looking one, with the round parking lights)
1967 Camaro "Project"
1972 Chevelle "454"
1979 Trans Am "Project Ls-1"
Yes GM will come out with that car but it will be a 4 door with the LS6 an at 5700 lbs. An they will say it is cool.This is what you need.An only $57.000 GM is going down the tubes Fast. Making only junk an crap. Just my 2 cents.
Blazer
Im not sure if i like it, upon first glance it kinda looked like the '05 mustangs. maybe i just need a side by side shot, but it looks too much like a ford and not an f-body.
-Dan
1986 350 TPI Trans Am, 700R-4, Flowmaster exhaust, CAI, 180* t/stat, low temp fan switch, SFC's....Sold.
Project Status: LT1 disassembled, researching costs, searching for project car.
Comment