Well I took out my power steering pump out to install a new high pressure hose, change the fluid, and paint it. I put it back following the recommended bleeding steps of turning the pump counter clockwise until all of the bubbles have gone away in the resovoir and I lifted the front end of the car and turned the wheels from stop to stop several time with the pump at normal operating temp. These steps apparently did not eliminate the air since I still get no assist with the weight of the car on the wheels. The pump makes a hissing sound when I try to turn the steering wheel but there is still no power steering. The engine speed does not seem to slow any when I do this. Any help with clearing this cavitation will be appreciated.
Warren
Warren
Comment