Software For Reading Codes laptop / Sensors in Tranny ?

[DierDesire824]

What software should i get to read codes on my 1997 Camaro Z28 and where should i buy it from ?


Also, while im posting are there any sensors in the Automatic Transmission on my car ? it seems to be leaking some tranny fluid D: no good since i just finished replaceing water pump and opti.

Alterenator is soon to be done to

[97LT1Z28]

Try this company.. ......

http://www.tekmatetools.com/

You'll need the VPW Cable and software - works great!

Good Luck!

[Injuneer]

There's some other info in this writeup..... some of the links are out of date, but AtuoTap and Virtual Dashboard are proven performers.

http://members.aol.com/FWForsythePE/HowTo/Scanner.htm

[DierDesire824]

Thanks for your opinions ill be looking around for one now

[Mailt4]

[QUOTE=DierDesire824]What software should i get to read codes on my 1997 Camaro Z28 and where should i buy it from ?


Also, while im posting are there any sensors in the Automatic Transmission on my car ? it seems to be leaking some tranny fluid D: no good since i just finished replaceing water pump and opti.

************************************************** ********

You have (2) shift Solenoids 1-2 and 3-4, (1) Electronic Pressure Control, (1) Torque Converter Control (PWM Lock-up), (1) 3-2 Down Shift and a Manifold Pressure Switch. All of these are bolted and cliped in you Valve Body, in addition you have an Output Speed Sensor in the Tail Housing and your Nutral Safty Switch.
I use a Snap-On Scaner ($3500.00) and it will read averything and anything in your Engine too.

[97LT1Z28]

I would look for leaks by the pan gasket, the front seal and the rear seal first.