Announcement

Collapse
No announcement yet.

Question about fuel rail parts.....

Collapse
X
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous Next
  • #1

    Question about fuel rail parts.....

    I yanked my engine out a few months ago and now that I am getting ready to reassemble it I noticed I have lost several of those clips that hold the injectors on to the fuel rails.

    Does anyone know where I can buy some of those little buggers? Or do they come with new injectors? I'm not sure if it is some kind of universal part.

    I know it's a minor part but I need serious help with this. Thanks.

    '95 TA A4, 118000 on the clock!
    Borla, Strange 3.73's, SLP CAI, Vortech elbow,AFS Z06 Wheels,White gauges/blue backlighting,blue custom interior,MBA Shift knob,MadZ28 Tune, Intrax springs, Bilstein shocks, ES Trans Mount, Honeycomb taillights.

    13.685@102.11
    Tags: None
  • #2
    If you're talking about the injector to rail retaining clips, that is probably a dealer only item. Even if you bent a few pulling them off, you can just gently bend them back into place and reuse them.

    Comment

    • #3
      I happen to have 8 extras from my 2000 laying around my garage that I've been wanting to sell for a while. I think the LT1 and LS1 are interchangeable.

      http://www.texasfbody.org/forums/topic.asp?TOPIC_ID=20
      =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

      2001 TA ~ 2000 TA ~ 95 TA - Sold ~ 87 FB - Buried in New Mexico ~ 86 FB - Sold

      Comment

      • #4
        when i put my ford racing 42lb'ers i didn't use the clips they didn't fit the injectors with a 255 intank pump i haven't had any leaks - kevin
        1994 Z28 stage 2 intercooled procharger, P-1sc, 6lb pully,42lbfuel injectors,255intank pump,1 3/4headers,highflow cat, borla ajust. cat back,chrome moly LCA,chrome moly ajust. panhard bar, Kenny Brownweld-in subframe conectors, built trans. kevlar lined 2600 stall, kevlar clutches, hardend parts,,built rearend; moser axles, eaton posi, richmond 3.42 gears, rare ROH ZR6 17* 9.5 wheels, custom computer tune with laptop and LT1edit , 380rwhp 395rwtq , 60' 1.71, 1/8th 8.00,1/412.60@109mph

        Comment

        Previous Next
        Working...
        X