Announcement

Collapse
No announcement yet.

LS1 and LT1 MAF differences?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • LS1 and LT1 MAF differences?

    Are there differences between the 2 MAFs? Or can one bolt onto the other with no problems - same output, same diameter, length, etc.?
    The reason I ask is because on Shoebox's web site, it lists 25008308 as the LT1 MAF. That part shows up in gmpartsdirect. However, once you checkout, the part changes to 25179711, which is the LS1 MAF. And the cost is about 1/2.

    Sorry if this was asked before, I can't seem to do searches on less than 4 chars, i.e. LS1, LT1, MAF
    94 Black T/A GT, Advanced Induction 355, 3200 stall, built 4L60E, Moser 9", Baer Brakes, Shooting for 11s...

  • #2
    Interesting. I didn't think they were directly interchangeable. A check at AC-Delco.com seems to indicate they are. The old AC-Delco part number (213-252) is no longer listed.
    Rob B 95Z A4 Tech Page (Part numbers / locations, how to's, schematics, DTC's...) Home Page - shbox.com

    Comment


    • #3
      Thanks Rob. I was most curious because I see a company called "Full Throttle Speed" lists it for $79.99. http://www.fullthrottlespeed.com/ite...2225170711.htm
      That's almost as cheap as buying it used.
      94 Black T/A GT, Advanced Induction 355, 3200 stall, built 4L60E, Moser 9", Baer Brakes, Shooting for 11s...

      Comment

      Working...
      X