Can anyone take a picture of the stock exhaust tips under the rear of the car. I will be installing refurbished rectangular tips on my car and need to see the location of them from under the car. I think iim gonna have to move the driver side pipe over about 4 inches. Some pics would help me out. Thanks guys
-
1996 Z-28 6 speed, Airfoil, K&N FIPK, Flowmaster muffler, Motive 3.73 gears, BBK shorty headers, cut-out, LS1 Driveshaft, no power options (Rare), Prothane tranny mount, MSD 8.5mm wires, Accel U-Groove Plugs, Chrome hurst short throw, TB Bypass, ES Torque arm mount, BMR subframe connectors (weld-in), Lt4 Knock Module, Descreened MAF, '02 SS wheels, Pioneer HU, MTX & JL amps, 2 12" JBL's, T-Top Conversion!
-
I'm going to try to work on my car today, so if I make it over there to work on it, I'll take some pics for you (if I can find my camera).95 A4 Z28 with 146K miles
My DD is a 94 Chevy 1/2 ton 2wd w/ 2/4 drop and 20" Centerline Stingray III's -
Originally posted by AJ52486
Thank you bro1996 Z-28 6 speed, Airfoil, K&N FIPK, Flowmaster muffler, Motive 3.73 gears, BBK shorty headers, cut-out, LS1 Driveshaft, no power options (Rare), Prothane tranny mount, MSD 8.5mm wires, Accel U-Groove Plugs, Chrome hurst short throw, TB Bypass, ES Torque arm mount, BMR subframe connectors (weld-in), Lt4 Knock Module, Descreened MAF, '02 SS wheels, Pioneer HU, MTX & JL amps, 2 12" JBL's, T-Top Conversion!
Comment
-
The lighting was pretty bad, so this is the only pic that was viewable. I'll take a light with me today. Before anyone says anything about the taillights, they were on the car when I bought it, and I'm getting rid of them as soon as possible. Btw, if anyone wants to trade their original tailights for mine, pm me.
http://www.geocities.com/aj52486/misc/exhaust.jpg95 A4 Z28 with 146K miles
My DD is a 94 Chevy 1/2 ton 2wd w/ 2/4 drop and 20" Centerline Stingray III'sComment
-
I took some more pics. Make sure that when you put the tips on, that they are both offset to the passenger side. By this, I mean that the pipe enters on the left side of the tip, if you're looking at them from the rear. I tried to get some measurements for you, and I'll explain them individually. In driver3.jpg, I measured from that metal bracket, as you can see in the pic. In passenger3.jpg, I measured from the right side of the pipe to the body, which I believe is the bottom of the spare tire compartment. In tip1.jpg, I measured from the back of the tip to the rear bumper. In tip2.jpg, I measured from the back bumper to the back of the tip. I hope that these are what you're looking for, and if you need anything else, just let me know.
http://www.geocities.com/aj52486/misc/driver1.jpg
http://www.geocities.com/aj52486/misc/driver2.jpg
http://www.geocities.com/aj52486/misc/driver3.jpg
http://www.geocities.com/aj52486/misc/passenger1.jpg
http://www.geocities.com/aj52486/misc/passenger2.jpg
http://www.geocities.com/aj52486/misc/passenger3.jpg
http://www.geocities.com/aj52486/misc/tip1.jpg
http://www.geocities.com/aj52486/misc/tip2.jpg95 A4 Z28 with 146K miles
My DD is a 94 Chevy 1/2 ton 2wd w/ 2/4 drop and 20" Centerline Stingray III'sComment
-
Those pictures are perfecto!! Thanks agian for taking the time to get those pictures, it will help me so much in getting those tips back to stock!1996 Z-28 6 speed, Airfoil, K&N FIPK, Flowmaster muffler, Motive 3.73 gears, BBK shorty headers, cut-out, LS1 Driveshaft, no power options (Rare), Prothane tranny mount, MSD 8.5mm wires, Accel U-Groove Plugs, Chrome hurst short throw, TB Bypass, ES Torque arm mount, BMR subframe connectors (weld-in), Lt4 Knock Module, Descreened MAF, '02 SS wheels, Pioneer HU, MTX & JL amps, 2 12" JBL's, T-Top Conversion!
Comment
Comment