I've been searching all over the place and can't find what I need to know: Are 2nd and 3rd gen F-body front sway bars the same?
Announcement
Collapse
No announcement yet.
I've been looking everywhere, need sway bar help.
Collapse
X
-
They are different.97 Chevy 'Raro Z28 M6- Ported & Polished LT1 heads,beehives,1.6/1.94 valves, 226/231 custom cam,K&N FIPK, 94-95 BBK shorty's,ORY,Magnaflow Catback,no cats,BMR LCA Relocation Brackets,Lower Control Arms,Adjustable Panhard Bar,Eibach Pro Kit,SPEC Stage 1,Walbro 255 Fuel Pump,30LB Injectors,Pro 5.0,Short stick,MSD 8.5's,NGK TR55's,LT4KM
01 Honda CBR600 F4i-Two bro's,Corbins,SS brake lines
-
I've been reading on the Impala board that guys use the 2nd gen F-body bar on our B-bodies so I wanted to use a hollow bar, from a 3rd gen, on my wagon. To my knowledge their is no factory hollow 2nd gen bar. Correct? I know the 3rd gen will fit the G-bodies but I always thought the 2nd and 3rd were the same allowing me to get 2 hollow bars from the junkyard, one for my wagon and the second for the GN. Guess I'll keep looking for a 2nd gen bar for the wagon. Thanks for the info.
Comment
-
I would like to recommend to Mr. Sam Strano
http://www.stranoparts.com/stranoboard.php
http://www.stranoparts.com/index.php
Ask your questions and you will have a realiable answers with or without to purchase anything from him..
Take care
dochidalgo97 A4 Pontiac Firebird Trans am with $everal mod$
Comment
Comment