lt1 cam swap
has anyone swapped a new cam in a lt1 i was wondering if it is worth it and can this be done in the car thanks.
-
93 trans am lt1 soon to be a 406 gen 1 sbc all bolt ons zr1 wheels dr in back built 700 r4. -
Yes, it's worth it and yes it can be done in the car. You'll have to pull out the radiator, fans, A/C condenser, water pump, etc...... everything off the front and everything out of the way in fromt of the engine. The cam will slide right in.
-
o and its fun too...haha
1996 Trans Am WS6
A4, 3" VForce Catback, Corvette C6 rims, Slotted and Drilled Rotors, 160*stat, BMR SFC, HPP3, B&M Shift Kit.
Comment
-
with LT4 hot cam - 1.6 rr - lt4 springs - new computer flash - mid lenght headers what kind of rear hp gains should you see?
1995 Z28 A4, SCC Ultra Z Hood with Air box/K&N filter, Granatelli Maf Sensor/Fernco bellow/Hotchkis STB/white face gauges/LT4 Knock module/March pullies/160* stat without Hypertech Tunning/Borla 3" y-pipe/HI Flo 3" cat/SLP Loudmouth/GM Motive 3.73's + TA rear end girdle/Afs ZR1's silver painted with polished lip 17x9.5 front & 17x11 out back/98 tail light's/BMR SFC's/spohn Lca's/spohn relo brackets & spohn adj. panhard rod " coated mid lenght pacesetters headers + 1.6rr + custom pc tuning going on soon hopefully "Comment
-
With those mods, It should be roughly 340-350 HP at the rear wheels.Originally posted by LoudLT1Comment
-
sweet... 340-350 HP at the rear wheels...
hunting 06 GT'S after install....
1995 Z28 A4, SCC Ultra Z Hood with Air box/K&N filter, Granatelli Maf Sensor/Fernco bellow/Hotchkis STB/white face gauges/LT4 Knock module/March pullies/160* stat without Hypertech Tunning/Borla 3" y-pipe/HI Flo 3" cat/SLP Loudmouth/GM Motive 3.73's + TA rear end girdle/Afs ZR1's silver painted with polished lip 17x9.5 front & 17x11 out back/98 tail light's/BMR SFC's/spohn Lca's/spohn relo brackets & spohn adj. panhard rod " coated mid lenght pacesetters headers + 1.6rr + custom pc tuning going on soon hopefully "Comment
Comment