how to pack hood for shipping help w/in...
guys i sold my stock 95 hood and need to pack it for shipping. any ideas???
thanks in advance for any ideas..
ed 95 Z28
thanks in advance for any ideas..
ed 95 Z28
-
1995 Z28 A4, SCC Ultra Z Hood with Air box/K&N filter, Granatelli Maf Sensor/Fernco bellow/Hotchkis STB/white face gauges/LT4 Knock module/March pullies/160* stat without Hypertech Tunning/Borla 3" y-pipe/HI Flo 3" cat/SLP Loudmouth/GM Motive 3.73's + TA rear end girdle/Afs ZR1's silver painted with polished lip 17x9.5 front & 17x11 out back/98 tail light's/BMR SFC's/spohn Lca's/spohn relo brackets & spohn adj. panhard rod " coated mid lenght pacesetters headers + 1.6rr + custom pc tuning going on soon hopefully " -
Fiberglass hoods are shipped in big cardboard boxes with support for the corners to keep them from breaking. A metal hood is different - the corners aren't as fragile. I suggest just calling some of the truck shipping companies and ask them - UPS, FedEx are probaly too expensive - just use a regular hauling company. It'll go by weight, so get quotes plus try to weigh the hood. -
Exatly JeffY, when my Harwood fiberglass hood arrived it was in a cardboard box with a ton of expandable foam at the corners and front edge. Even though yours is metal, I would take the same steps to ensure the corners dont get smacked and/or bent during shipping. The guy you sold it to would appreciate it, I'm sure.
95 Z28, A4, 3.23's and some other stuff....Comment
Comment