Are the interior parts interchangeable between LT1 Trans Ams/Firebirds and Camaros? I'm trying to change all the gray interior panels in my car to black and found a guy with black hatch trim and the interior panels next to the rear seats from a 95 Trans Am and I was wondering if they would fit mine.
Announcement
Collapse
No announcement yet.
Interior trim interchangeable between Camaros and 'Birds?
Collapse
X
-
Interior trim interchangeable between Camaros and 'Birds?
95 Z28 - K&N FIPK, Flowmaster cat-back, Edelbrock STB, UMI Perf SFC, Performabuilt Pro Street 4L60E, 2800 Stall, Hayden tranny cooler, CRT Intake elbow, LS1 DS, 2k C5 replicas, Toyo Proxes T1S 255/40/17(f) 285/40/18(r), slotted rotors w/ Axxis MM pads, 15% front/5% rear tint, 97+ Console upgrade, all oils now synthetic
Bought andto install: UMI Adj LCA, Adj Panhard, LCA relocation brackets, 96 SS Spoiler....Broken and
to be fixed
Tags: None
-
everything is interchangable...but the speaker connections are different for the different systems...other than that, swap away.
Christopher Teng
1999 · A4 · 3.73's · Auburn LSD · Whisper Lid · K&N · Pacesetter Headers/Y-pipe
Magnaflow Cat & Catback · MSD Coils/Wires · Bosch +4 Plugs · EGR Bypass
B&M SuperCooler · 160* Stat · Descreened MAF · SLP CAI · BMR STB & SFC
Strano Sways · Eibach Springs · Bilstein HD Shocks · Hawk-Pads · Brembo Blanks
Speedlines · Nitto 555s · Texas Speed Mail Tune
Lots of Weight Savings · Stubby Antenna · Corbeau TRS · Zaino · 273K
F-Body Dirty Dozen
Comment
-
The driver's power mirror switch is different, but you can find a conversion schematic on my Tech Page.Rob B 95Z A4 Tech Page (Part numbers / locations, how to's, schematics, DTC's...) Home Page - shbox.com
Comment
-
I got some leather door panels out of a wrecked SS, so that's taken care of. Speakers are coming out anyways for a nice set down the road. Now I just need a day that's above freezing so I can go put these suckers in.95 Z28 - K&N FIPK, Flowmaster cat-back, Edelbrock STB, UMI Perf SFC, Performabuilt Pro Street 4L60E, 2800 Stall, Hayden tranny cooler, CRT Intake elbow, LS1 DS, 2k C5 replicas, Toyo Proxes T1S 255/40/17(f) 285/40/18(r), slotted rotors w/ Axxis MM pads, 15% front/5% rear tint, 97+ Console upgrade, all oils now synthetic
Bought andto install: UMI Adj LCA, Adj Panhard, LCA relocation brackets, 96 SS Spoiler....Broken and
to be fixed
Comment
Comment