Announcement

Collapse
No announcement yet.

4th Transmission mount........Problem???

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    i ve bought an 'anchor' korean made transmission mount after the stock one gave way, and it broke after a few days. it was pretty expensive for what it is , around $75 , and when i phoned the shop that sells them asking if they had any warranty they said something is wrong with my car, then the warranty doesnt apply outside the USA, so thats the last part i m buying from them..

    i would stay clear of the aftermarket replacement parts unless they are energy suspension and the like ,and just buy GM parts

    My car has 1.5 inch lowering springs and no relocation brackets for the lower control arms, and 275 , i am going to check for
    -weak motor mounts
    -incorrect pinion angle
    -incorrect alignment of engine/tranny package , thanks Fred
    93 t/a A4 3.23s
    95 Formula A4 2.73s >>>>93 t/a 3.23 , !AIR, !cat, !A/C, hotchkis lowering springs, kyb adj shocks, DD
    99 Camaro z28 a4, 2.73, !AIR, !A/C
    99 Alfa Romeo 166 3.0 v6, red
    97 3.8 v6 A4 camaro, hardtop
    93 Camaro Z28 M6, hotcam kit, 150 shot, twin plate clutch, eibach pro kit and bilstein shocks, swaybars etc
    00 audi a6 4.2 40 valve v8

    Comment


    • #17
      Thank yall for all the help, i appreciat it, i am going to look for an energy mount, you talk good about it and i trust your judgement.

      Comment


      • #18
        Originally posted by Trans Am
        i ve bought an 'anchor' korean made transmission mount after the stock one gave way, and it broke after a few days. it was pretty expensive for what it is , around $75 , and when i phoned the shop that sells them asking if they had any warranty they said something is wrong with my car, then the warranty doesnt apply outside the USA, so thats the last part i m buying from them..

        i would stay clear of the aftermarket replacement parts unless they are energy suspension and the like ,and just buy GM parts

        My car has 1.5 inch lowering springs and no relocation brackets for the lower control arms, and 275 , i am going to check for
        -weak motor mounts
        -incorrect pinion angle
        -incorrect alignment of engine/tranny package , thanks Fred
        if you have lowering springs with no adjustable panhard bar, your rear end is most likely out of alignment.
        87 GTA: it's winter time, all tore apart

        ConElite: "Im 22, have had my TA since I was 21."

        "I wont lie, I have a heavy foot, but at the same time I know when its the safest to ring out a gear or 2."

        Comment


        • #19
          Thanks guys, i went up to o'reillys and they happend to have a energy mount on hand, and they refunded my old mount... i love the service there if you are in the austin area go to oreilly's in cedar park

          Comment

          Working...
          X