I need to replace the small hose that goes from the top of the w/p to the bleed valve metal pipe. However, how do you get the rubber hose out of the metal pipe? 
HELPPPP!!!!!
HELPPPP!!!!!
-
-Ryan-
1997 Pontiac Firerbird Formula LT1/T56
2006 Pontiac G6 GTP, 3.9L V6, 6-spd -
Use a Dremel with a cut-off disc and score the swaged collar (don't go into the metal pipe under the rubber hose). Peel the collar off, replace the hose and secure it with a normal hose clamp.Rob B 95Z A4 Tech Page (Part numbers / locations, how to's, schematics, DTC's...) Home Page - shbox.com -
I used a pair of wire cutters. BTW the pipe underneath (restrictor) on mine was plastic.2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"Comment
Comment