Hit the dyno yesterday...

[Mark B]

Did pretty well.

275rwhp/311rwtq Cutout Closed
285rwhp/316rwtq Cutout Open

Mods are below.

Any idea what time I should run in the 1/4 in a 3400lb 3rd gen?

[Joe 1320]

My guess would be 13.4@103 mph at sea level.

[Mark B]

13.4 Huh? Time for more mods.

[Joe 1320]

I would consider 1.6 LT4 roller rockers, throttle body heat bypass, airfoil, and drag radials. Also unhook the end links to the swaybar for quarter mile passes. those could get you down to 13.0-13.1

[ConElite]

13.4 is kinda low no? Im pushing 310+ at the wheels and I cant Manage even a 13.5 and im pretty close to sea level.

[Joe 1320]

Gotta remember that he's 3400lbs. Each 100lbs or 10HP is equal to a tenth and 1 mph.

besides, that's just a ballpark guess for performance at sea level. Elevation, motor condition, track conditions all play a role. My guess of 13.4 would be best case.

[lt1-xjs]

Sticky tires (dr's) a good 60' 12.9x @ 105 cut-out open

[Mark B]

The results are in!!

1st Pass
RT - .152
60' - 2.191
1/8 - 8.849
1/4 - 13.561
mph - 104.65

2nd Pass
RT - .822 (I fell asleep)
60' - 2.021
1/8 - 8.645
1/4 - 13.357
mph - 104.60

Im VERY pleased with the results. I think the car has a 13.1 in it, but I would have needed another pass or two to extract it out.

[Joe 1320]

Congrats! You beat my guestimate.

[ConElite]

I think the car has a 13.1 in it, but I would have needed another pass or two to extract it out.

Im pretty sure you can if you Dump the clutch on some stickies, but then you run the risk of ur rear-end going BOMB! Are you power-shifting, That will make a pretty big difference. 13.3 Is damn nice. With a 2.00 or under 60' should be knocking on a 13.1.

[Mark B]

Im going to Atco tonight. We will see what happens. Im going for the 13.1

[Mark B]

Didnt get the 13.1 Couldnt even beat last nights times. I ran a best of 13.37 @ 105mph

Every run I either spun or bogged. 60' times are still around 2.0xx

Time to practice more