Hey whats up? I took my camaro into the shop because the Service Engine Soon light came on. I was told that my Mass Air Flow Sensor has gone bad and it needs to be replaced. From the looks of it, it looks like any one can replace the part, its pretty much sitting right on top. So do you know where I can find this part. The shop told me it would cost about $400 to have it done there. I think I can find the part a little cheaper and do it myself. I have a 1996 V6 3.8L automatic Camaro. Thanks for any help
-
-
Get a new official GM part from Dal Slabaugh at Van Dere Olds, call him at 877-448-5451 or try a local scrap yard, or car-parts.comThe Old Guy! '94 z-28, m-6, t-tops, go-fast red, 316k. Now with '96 engine w/ Lt-4 hot cam, roller rockers, heavy duty timing chain, and Spec stage 2 clutch.
-
The parts list shows 2 different models used on the 96 3.8L V6. There is a 2 screw mounting version and a 3 screw mounting version. Here are the part numbers and prices from http://www.gmpartsdirect.com/
2 screw = 24505519 $110.00
3 screw = 24504302 $110.002002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"Comment
-
Thanks!!!
Thanks! I think you just saved me a couple hundred dollars.Comment
Comment