Need help (A.S.A.P. please)

[Red97v6Bird]

Alright I'm in the process of removing my AIR/EGR systems and what I need to know is if I can remove the whole diaphram/thingy? at the back of the intake manifold on the driverside http://shbox.com/1/air_pump_recall.jpg
the cylinder thing in the bottom right panel in the insert window.

I have an air system block off plate and I'm pretty sure thats where it goes but I just want to be certain before I take it off.

I will be having a tune to delete trouble codes so that is not a concern.

Thanks guys

[Rob B (shoebox)]

That's the EGR valve. If you have EGR (not AIR) block-off plates, you can remove it.
EGR and AIR are two separate things (though they share some piping on a 1993 only).

http://shbox.com/1/egr1.jpg

[Red97v6Bird]

Sweet, I can take it off then. As usual Rob you are the f-body version of a guardian angel

[Red97v6Bird]

next question . . .

how do I get off the other thing there

http://shbox.com/1/egr.jpg

P/N 1997223 in the picture on the right

I can't figure out what is still holding that thing on

[Rob B (shoebox)]

next question . . .

how do I get off the other thing there

http://shbox.com/1/egr.jpg

P/N 1997223 in the picture on the right

I can't figure out what is still holding that thing on

The nut #11 is holding the bracket on.

[Red97v6Bird]

is that on the intake manifold then . . . ?

[Rob B (shoebox)]

is that on the intake manifold then . . . ?

Yes, it is on one of the studs.

[Red97v6Bird]

Found it
Thanks again Rob