just curious if there are jounce bumpers available aftermarket that are better that what comes from the dealership. i havent found anything except the slp spacers searching the web. mine are shot.. probably due to previous owner.. and looking for replacements. thaks- ron
-
previous- '82 recaro. current-bone stock '02 t/a 6sp base model. -
I don't know if "better" but an alternative to stock...
http://www.camaroz28.com/forums/showthread.php?t=642268Rob B 95Z A4 Tech Page (Part numbers / locations, how to's, schematics, DTC's...) Home Page - shbox.com -
Al 96 Ram Air T/A
Mods: Build # 784 * Hotchkis STB * SFCs * Borla cat back w/QTP cut-out * AS&M/RK Sports Mid-length headers w/single CAT * Koni SA shocks on lower perch w/ lowered rear * Strano Hollow front & rear antisway bars * 1LE front/rear springs * 1LE aluminum driveshaft * Strange 4.10 gears w/ Zexel Torsen diff. * ARP bearing cap studs & aluminum diff cover* J&M Hotpart poly/poly rear LCAs and poly/poly panhard bar * RAM Powergrip clutch w/ LT4 PP and RAM billet Al flywheel * C5 Z06 brakes * C6 Z06 wheels * Spohn T/A * Spohn DS Loop * fully custom interior w/ custom audioComment
-
I cut the metal part in half, used a grinder to add more wheel clearance, then turned them around closer to the pumpkin. I believe the Z28 is angled and the WS6 style is flat(harder bumpin)2000 Z28 SLP sub frames, J&M LCA's, KYB shocks, Waitforme tuning. Ported TB & intake 35/22 swaybars, Firehawk tiresComment
Comment