Driving down over the bridge in Cape Coral about 2am noone on the bridge, decide to open it up - As soon as i do i hear POP! from my exhaust then SES light comes on and i hear a verry loud rassping sound coming from the front driver side exhaust. I heard it intermidently before getting louder and louder over the months however this time when i opened it up the exhaust gasket must of blew... I popped the hood and noticed right at the front edge of the head where the gasket mates to the head there is a big piece around the headers that looked ripped off/ blown - obviously the problem. This leads me to my question - Is it possible to just pull all the header bolts and just slightly move the header to the side and slide a new gasket in there or do i have to drop the whole exhaust to replace this gasket? (Driver side)
-
-
Short answer...yes.Al 96 Ram Air T/A
Mods: Build # 784 * Hotchkis STB * SFCs * Borla cat back w/QTP cut-out * AS&M/RK Sports Mid-length headers w/single CAT * Koni SA shocks on lower perch w/ lowered rear * Strano Hollow front & rear antisway bars * 1LE front/rear springs * 1LE aluminum driveshaft * Strange 4.10 gears w/ Zexel Torsen diff. * ARP bearing cap studs & aluminum diff cover* J&M Hotpart poly/poly rear LCAs and poly/poly panhard bar * RAM Powergrip clutch w/ LT4 PP and RAM billet Al flywheel * C5 Z06 brakes * C6 Z06 wheels * Spohn T/A * Spohn DS Loop * fully custom interior w/ custom audio
Comment