Where are the sub frame connectors? What about the Spohn LCAs and panhard bar. Oh and the Hotchis strut tower brace.
-
2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen" -
I said it was going to be a replica of my car! And my car's stock! so there! hahaa99 SS, MTI Lid, 3.90 gears, Hurst shifter, DMH 3" e-cutoutComment
-
All done! I gotta smooth out the paint job a bit with some rubbing compound, but other than that, it's all set!
Pretty close replica!
99 SS, MTI Lid, 3.90 gears, Hurst shifter, DMH 3" e-cutoutComment
-
Did you spray paint the body? I usually use cans for small parts but I have an airbrush for bigger parts like the hood and the rest of the body. I finally got the hang of it. I'll have to post some pics of my German Focke Wolf FW190 F8 model. I thinks it pretty good for one of my first WW2 plane models. The real challenge was airbrushing all the little spots of camouflage. My Spitefire MkIX (9)was a challenge as well.'95 Formula A4, 17"x9" wheels, F1 275/40-ZR17, TB bypass, 160 deg. TS, LS1 drive shaft, WS6 muffler, LCA, tie rod Soon to be LT4 heads intake and HOT cam.Comment
-
Good Job! It came out nice.Comment
-
I used to go to the auto parts store and buy the duplicolor paint and use that. They looked really good. I'll see if I can dig some of them up from where ever they are and take a picture of them. I should Zaino them first.
2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"Comment
-
here is my FW-190
I took many hours and many custom parts to get a desent likeness.LT4KM, 160' TS, MAF ends, TB-bs, 1.6 R/R, SLP CAI, LCA, tierod, 17x9"F/R, 275/40R17 tires. WS6 Muffler, LS1 DS. 21mm rear sway bar. Soon to be LT4 heads, intake, & HOT camComment
-
AHHHHHHHHhhhhhhhhhhhhhhh!!! HELL..i want that!! where did you get it from? how much did it cost?? DAMN i want one of those!!! that lil' thing is cool as hell!! i mean the z28, not the airplane!Comment
-
Any hobby shop should have them by Revell or Monogram. They are usually in 1:24th or 1:25th scale.'95 Formula A4, 17"x9" wheels, F1 275/40-ZR17, TB bypass, 160 deg. TS, LS1 drive shaft, WS6 muffler, LCA, tie rod Soon to be LT4 heads intake and HOT cam.Comment
-
I want a 1:1 scale. Actually a P51 would be better. I love that Merlin engine.
2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"Comment
-
Sweet FW!!
I used to do a lot of plane models when I was a kid.. Used an airbrush mostly..
Good job!99 SS, MTI Lid, 3.90 gears, Hurst shifter, DMH 3" e-cutoutComment
Comment