Rearend

[Outlaw02]

Hi everyone, I have a few questions I hope you guys can help me out with.

#1 what’s the recommended width for a rear end?
#2 what’s is the biggest wheel and tire I can fit in the stock wheel well?


Thanks!!!






http://www.bowmanmotorsports.com

[Injuneer]

Re: Rearend

Originally posted by Outlaw02
Hi everyone, I have a few questions I hope you guys can help me out with.

#1 what’s the recommended width for a rear end?
#2 what’s is the biggest wheel and tire I can fit in the stock wheel well?
[/URL]

On what car? How is it used - street or strip?

[wolfdogs]

2002 camaro, right?

315/35r17's for street use. need to do some wheel well "moding" with a ball pein hammer though..........to be safe. some dont ..but i would. make sure you get the right rims with correct offset.

fred can answer the drag tire question if it is one....judging from the link you put in your sig, im sure it is.

your'e gonna have to swap rears out..Freds good on that too. slicks with the mods you are planning will rip the stock rear out and throw it in the bleachers............

[Mirroredshades]

I prefer 36X24X36 myself. But its all pretty much a preferece thing.

[Jeff_in_Atl]

Using Mirroredshades numbers, 36" circumference =about 11.5" across. That would be for a circle so since it is more oval, I'm guessing the rear end width should be about 14".