I would like to get a set for both the '97 T/A and the Vette. I don't want some cheap ricer set. I would like the real thing. Anybody have any thought as to which company? ...website?
-
'77 K5 rock-crawler project
'79 T/A: WS6, 400 4sp, 40K miles; Completely stock and original
'87 Lifted 3/4 ton Suburban (Big Blue) plow truck
'94 Roadmaster Wagon (The Roadmonster) 200,000 miles and still going
'97 T/A: (SLP 1LE Suspension, SB, & sfc(s), Loudmouth); 4.10s; B&M Ripper; R/A Hood; ZR1s
My daily drivers: '06 Jeep Liberty CRD (wife); '01 Yukon Denali XL (me); '03 Stratus Coupe (me)
I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
Thomas Jefferson -
mark,
i've seen them on ebay for about 65.00 very nice pedals. but they only have them for manuals
i have a auto....
good luck,
ed
1995 Z28 A4, SCC Ultra Z Hood with Air box/K&N filter, Granatelli Maf Sensor/Fernco bellow/Hotchkis STB/white face gauges/LT4 Knock module/March pullies/160* stat without Hypertech Tunning/Borla 3" y-pipe/HI Flo 3" cat/SLP Loudmouth/GM Motive 3.73's + TA rear end girdle/Afs ZR1's silver painted with polished lip 17x9.5 front & 17x11 out back/98 tail light's/BMR SFC's/spohn Lca's/spohn relo brackets & spohn adj. panhard rod " coated mid lenght pacesetters headers + 1.6rr + custom pc tuning going on soon hopefully " -
Go to:
http://www.mbaproducts.com/
Click on "interior".... scroll down to the pedal covers. MBA Products stuff is exceptional quality. Not sure if they have any Corvette stuff though.
Fred
381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motorComment
-
I actually have a pair of aluminum pedals for my bird that were given to me. I put them on just because they were free, but whats the point? What do they do other than look nice?96 WS6 Formula: Ram Air, 383 Stroker, Ported LT4 Heads and Manifold, 1.6 Crane Rollers, 58MM T.B., AS&M Headers, Borla Exhaust, Meziere Elec. H2O Pump, Canton Deep Sump Oil Pan, 100 HP OF TNT N2O!! , T56 Conversion w/ Pro 5.0 shifter, SPEC Stage 3 Clutch, Hotchkiss Subframe Conn., Lakewood Adj. Panhard Bar, Spohn Adj. LCA's, BMR Adj. T.A., Custom 12 bolt w/ 3:73's, Moser Axles, Eaton Posi, Moser Girdle
11.6 @ 123mph (1.6 60' - getting there
)
Comment
-
I guess there is not that much point. Although, both car's rubber pedal covers are fairly worn so I need to replace them with something. I think replacing the pedal covers and the floor mats with nicer materials can be a good thing (if it is done right.) After 100,000 miles as a daily driver, I am finally cleaning my T/A, fixing everything, and setting it up the way I want it.Originally posted by N20LT4Bird
I actually have a pair of aluminum pedals for my bird that were given to me. I put them on just because they were free, but whats the point? What do they do other than look nice?'77 K5 rock-crawler project
'79 T/A: WS6, 400 4sp, 40K miles; Completely stock and original
'87 Lifted 3/4 ton Suburban (Big Blue) plow truck
'94 Roadmaster Wagon (The Roadmonster) 200,000 miles and still going
'97 T/A: (SLP 1LE Suspension, SB, & sfc(s), Loudmouth); 4.10s; B&M Ripper; R/A Hood; ZR1s
My daily drivers: '06 Jeep Liberty CRD (wife); '01 Yukon Denali XL (me); '03 Stratus Coupe (me)
I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
Thomas JeffersonComment
-
I wasnt trying to knock it.....I was just curious as to whether or not there was a performance reason. Your right though, if its done nice, the aluminum pedals look nice!96 WS6 Formula: Ram Air, 383 Stroker, Ported LT4 Heads and Manifold, 1.6 Crane Rollers, 58MM T.B., AS&M Headers, Borla Exhaust, Meziere Elec. H2O Pump, Canton Deep Sump Oil Pan, 100 HP OF TNT N2O!! , T56 Conversion w/ Pro 5.0 shifter, SPEC Stage 3 Clutch, Hotchkiss Subframe Conn., Lakewood Adj. Panhard Bar, Spohn Adj. LCA's, BMR Adj. T.A., Custom 12 bolt w/ 3:73's, Moser Axles, Eaton Posi, Moser Girdle
11.6 @ 123mph (1.6 60' - getting there )
Comment
-
A lot of us have the MBA pedals. I wasn't sold on them at first, but after I installed I was very pleased with the purchase. It really is a better feel than the rubber pedals. The only time it gets a little slippery on the pedals is when I wear leather soled dress shoes... but not bad. Overall I believe they are an upgrade in looks and feel over the rubber covers.
1999 Black TA Ram Air M6 with lots of Mods and many coats of Zaino!
http://community.webshots.com/user/runbikejrb1Comment
Comment