Hey Guys, I am looking for a painted black rear trans am or formula bumper for a 97...If anyone knows of any let me know please..Thanks
-
-
Not to steal your post, but im looking for a Camaro Front bumper 93-97 and a passanger side front fender (preferably red).99 Z Hugger Orange 9/05
93 Z 6/03
Zaino!! -
I am going to get rid of mine soon (bought a new one)...but the only problem is mine needs to be sanded and painted. I'm getting rid of it because there are several chips here and there, scratches, etc. It is structurally good still. The only problem is that these bumpers are a PITA to sand down completely and repaint (flex primer, paint, clear coat, etc.)94 Black T/A GT, Advanced Induction 355, 3200 stall, built 4L60E, Moser 9", Baer Brakes, Shooting for 11s...Comment
-
Re: looking for trans am bumper
Don't forget, Trans Am & Formula bumpers differ. Putting a Trans Am bumper on a Formula will not look right since the bumper hangs lower. Same goes with a Formula bumper on a Trans Am, it's higher.Originally posted by 97firebird
Hey Guys, I am looking for a painted black rear trans am or formula bumper for a 97...If anyone knows of any let me know please..ThanksHercules
2008 Sunburst Metallic HHR LTComment
-
Originally posted by Craig 94 TA GT
I am going to get rid of mine soon (bought a new one)...but the only problem is mine needs to be sanded and painted. I'm getting rid of it because there are several chips here and there, scratches, etc. It is structurally good still. The only problem is that these bumpers are a PITA to sand down completely and repaint (flex primer, paint, clear coat, etc.)
I'd never try to sand one down by hand... Just paint on the stripper and wait. The old paint will wipe right off.Tracy
2002 C5 M6 Convertible
1994 Z28 M6 Convertible
Current Mods:
SLP Ultra-Z functional ramair, SS Spoiler, STB, SFCs, Headers, Clutch, Bilstein Shocks, and TB Airfoil. 17x9 SS rims with Goodyear tires, 160F T-Stat, MSD Blaster Coil, Taylor wires, Hurst billet shifter, Borla catback with QTP e-cutout, Tuned PCM, 1LE Swaybars, 1LE driveshaft, ES bushings, White gauges, C5 front brakes, !CAGS, Bose/Soundstream audio, CST leather interior, synthetic fluids
Comment
-
Yea, been there. Tried to hand sand the front bumper...you wouldn't believe how many ripples and valleys and bumps showed up.
The only thing about the rear bumper is that it is deeply chipped in some areas, I would think it would be needed to be sanded by hand....as other areas are fine. There's a large gap of the higest spot of good paint, to the lowest spot of chipped/gouged primer. However I never tried the liquid stripper before so I don't know how well it would work in this case
94 Black T/A GT, Advanced Induction 355, 3200 stall, built 4L60E, Moser 9", Baer Brakes, Shooting for 11s...Comment
-
I have a black 94 formula back bumper in good condition with no cracks what are you looking to spend?? Email me at rccola01@aol.comOriginally posted by 97firebirdComment
Comment