Ive been thinking about lowering the z a bit, and new springs would be nice in the handling department. any one got a specific brand they have used and would reccomend ?? also how much would you reccomend going ? ive heard 2" alot but it seems a little much ... seems too low for this car. mabey im wrong though.
-
-Nick-
95 A4 Z28 -
This is what i got,
http://www.slponline.com/view_produc...RTNUMBER=10567
Lowers your car by an inch.Hercules
2008 Sunburst Metallic HHR LT -
i went with the 1.5 -1.75 inch springs. they look great but i do drag a lot. have to go side ways big time up steep drives etc. makes the car feel really low when you walk up to it. i love it would not change.1994 Trans Am GT
http://www.sounddomain.com/memberpage/208684/1
Ram Air hood and airbox
headers
exhaust
lowered 2"
underdrive pully
sloted rotors
electric water pump
air foil
denso plugs
taylor wires
tinted windows
eagle rims
2000 watt stereoComment
-
I am using Hyperco springs with Bilstein HD shocks. 1.25 inch drop all around. They ride and handle great, but I also have to be carefull with speed bumps and driveways.
Kbddsfc,B&M Ripper,Ws6 Rims,Hotchkiss Stb,Bmr Lca,Gwphr,Strange 4:10's,LPEds,Borla,AS&M Headers,RT cat,Powerslot rotors,Hawk Pads R/Pf pads Fr,Mba shift knob,Slp Hood&Airbox,Holley Powershot filter,Fernco mod, Lt4km,Firebat decals,T/A Girdle,HPP.160stat,Bilstein shocks,Z06 Brakes,AFS ZR1's,GSD3's.Comment
-
i got eibach springs w/bilsten shocks and struts..1998 v-6 Firebird, t-tops...
mods: flowmaster exhaust, K&N air filter, 3.73 gears, cold air induction, whisper lid, ac delco rapidfire spark plugs- running with mobile 1 synthetic
http://www.cardomain.com/memberpage/506859Comment
-
Eibach pro-kit on mine, with 17s wrapped in 285 40's
2006 GTO Impulse Blue Metallic, Blue Leather Interior
Traded in: 1998 Z28
http://www.cardomain.com/id/hotwhip9Comment
-
Also I have been looking at another option I read about which might work better. Sam Strano recommends Koni SA for the front which when set on the lowest setting will drop it 3/4 of an inch. Then for the back you run 3RD Gen Bilstein HD's, take the rubber spacer out and wrap the top coil in heater hose. This will drop the back 1/2 inch. Supposed to ride and handle great, and get rid of the 4x4 look. Just another option. I am thinking of trying it and selling my setup cause I am tired of scraping on things.Kbddsfc,B&M Ripper,Ws6 Rims,Hotchkiss Stb,Bmr Lca,Gwphr,Strange 4:10's,LPEds,Borla,AS&M Headers,RT cat,Powerslot rotors,Hawk Pads R/Pf pads Fr,Mba shift knob,Slp Hood&Airbox,Holley Powershot filter,Fernco mod, Lt4km,Firebat decals,T/A Girdle,HPP.160stat,Bilstein shocks,Z06 Brakes,AFS ZR1's,GSD3's.Comment
Comment