My 86 T/A stalled out on me while I was driving one night and I took it to a shop to get it fixed adn it turned out to be a couple of wires that overheated adn had worn through. So they fixed those adn also attached a couple of wires (i believe to the battery) that were previously unattached, i had noticed this before but since the car had ran fine for almost 10,000 miles i did not see it as a problem. Now that they have fixed the problem and connected the wires the car runs "really rough". I have a replacement 305 in the car (that i did not put in myself but was done by a mechanic) so the timing on the distributor was different. When they fixed the distributor timing the engine still ran rough and at this point the shop seems to be unable to tell me whats wrong. Any advice would be appreciated, and also could those battery wires they connected have anything to do with the engines rough running condition? Thanks.
-Dan
-Dan
Comment