Announcement

Collapse
No announcement yet.

Who makes these wheels?

Collapse
X
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous Next
  • #1

    Who makes these wheels?

    If anybody could tell me who makes these wheels on this black 97 WS6 I would greatly appreciate it.
    Thanks,
    Ryan

    http://www.slponline.com/car.asp?C=1993-1997%20F-Body
    Life is not a journey to the grave with the intention of arriving in a well preserved body, but rather to skid in broadside thoroughly used up and totally worn out, loudly proclaiming......WOW WHAT A RIDE!!!
    Tags: None
  • #2
    I noticed those a long time ago I love 'em. I would guess SLP makes them since it's on their site, I doubt they'd have someone elses rims on their. They look like custom zr1's. Probably the 11" ones.
    97 Chevy 'Raro Z28 M6- Ported & Polished LT1 heads,beehives,1.6/1.94 valves, 226/231 custom cam,K&N FIPK, 94-95 BBK shorty's,ORY,Magnaflow Catback,no cats,BMR LCA Relocation Brackets,Lower Control Arms,Adjustable Panhard Bar,Eibach Pro Kit,SPEC Stage 1,Walbro 255 Fuel Pump,30LB Injectors,Pro 5.0,Short stick,MSD 8.5's,NGK TR55's,LT4KM

    01 Honda CBR600 F4i-Two bro's,Corbins,SS brake lines

    Comment

    • #3
      These might be ROH wheels. 1(480) 545-8397
      they came on impala SS and firehawks. in the mid 90's.
      good luck...
      eddie
      1995 Z28 A4, SCC Ultra Z Hood with Air box/K&N filter, Granatelli Maf Sensor/Fernco bellow/Hotchkis STB/white face gauges/LT4 Knock module/March pullies/160* stat without Hypertech Tunning/Borla 3" y-pipe/HI Flo 3" cat/SLP Loudmouth/GM Motive 3.73's + TA rear end girdle/Afs ZR1's silver painted with polished lip 17x9.5 front & 17x11 out back/98 tail light's/BMR SFC's/spohn Lca's/spohn relo brackets & spohn adj. panhard rod " coated mid lenght pacesetters headers + 1.6rr + custom pc tuning going on soon hopefully "

      Comment

      • #4
        They do look very similar to the ROH or HRE wheels. I do not think SLP makes them becuase they are not on their site. Too bad the ROH and HRE wheels sell for around $800 each. Anybody have any other ideas who might make these, I would consider $300 each, but $800 is ridiculous for a wheel.
        Life is not a journey to the grave with the intention of arriving in a well preserved body, but rather to skid in broadside thoroughly used up and totally worn out, loudly proclaiming......WOW WHAT A RIDE!!!

        Comment

        • #5
          RYANB58,
          chevy high performance add has these prices 17 x 8 = $210 & 17 x 9 $ 235
          call that number i listed before. they might be cheaper than you think
          later,
          eddie
          1995 Z28 A4, SCC Ultra Z Hood with Air box/K&N filter, Granatelli Maf Sensor/Fernco bellow/Hotchkis STB/white face gauges/LT4 Knock module/March pullies/160* stat without Hypertech Tunning/Borla 3" y-pipe/HI Flo 3" cat/SLP Loudmouth/GM Motive 3.73's + TA rear end girdle/Afs ZR1's silver painted with polished lip 17x9.5 front & 17x11 out back/98 tail light's/BMR SFC's/spohn Lca's/spohn relo brackets & spohn adj. panhard rod " coated mid lenght pacesetters headers + 1.6rr + custom pc tuning going on soon hopefully "

          Comment

          • #6
            They could also be Simmons wheels. Not sure of the exact model but the deep lip leads me to believe they are not Zr1's
            Kbddsfc,B&M Ripper,Ws6 Rims,Hotchkiss Stb,Bmr Lca,Gwphr,Strange 4:10's,LPEds,Borla,AS&M Headers,RT cat,Powerslot rotors,Hawk Pads R/Pf pads Fr,Mba shift knob,Slp Hood&Airbox,Holley Powershot filter,Fernco mod, Lt4km,Firebat decals,T/A Girdle,HPP.160stat,Bilstein shocks,Z06 Brakes,AFS ZR1's,GSD3's.

            Comment

            Previous Next
            Working...
            X