Announcement

Collapse
No announcement yet.

Just wanted some info about gears

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Just wanted some info about gears

    ok so 6-speed cars have 3.42's, first gear option A4 cars have 3.01's and other A4's have 2.73's
    RIght?
    1967 VW Bug 2.3L Ford SVO Inline 4 w/ Turbo, Sand-Drag VW Trans Axle, Race this Import.
    2001 Dodge Ram 1500 Totally Stock

  • #2
    Originally posted by Squat13
    ok so 6-speed cars have 3.42's, first gear option A4 cars have 3.01's and other A4's have 2.73's
    RIght?
    3.23s not 3.01s...

    ...I think...
    Former Ride: 2002 Pontiac Trans Am WS6 - 345 rwhp, 360 rwtq... stock internally.

    Current Ride: 2006 Subaru Legacy GT Limited - spec.B #312 of 500

    Comment


    • #3
      Depends what years:

      from the 4th Gen FAQ:

      Q: What are the stock transmission gear ratios and torque capacities?

      A: The following were available by year:

      Year Model/Optn 1st 2nd 3rd 4th 5th 6th Final
      ---- ------------- ---- ---- ---- ---- ---- ---- -----
      1993 Manual/M28 3.36 2.07 1.35 1.00 0.80 0.62 2.73 (GU2)
      1993 Manual/M29 2.97 2.07 1.43 1.00 0.80 0.62 3.23 (GU4)
      1993 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 2.73 (GU2)
      1993 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 3.23 (GU5)

      1994 Manual/MN6 2.66 1.78 1.30 1.00 0.74 0.50 3.42 (GU6)
      1994 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 2.73 (GU2)
      1994 Auto/MX0 3.06 1.63 1.00 0.70 -- -- 3.23 (GU5)

      The '95s and later have the same ratios as the '94s. Aside from the CAGS provision and different gearing/input shaft (on the post 93's), all of the 6-speed transmissions are basically the same.

      Because of differences in the ratios, the torque capacities are different for each model. The shorter the transmission gear (higher numerically), the less torque it can handle. Note that these ratings from GM can be are considered conservative as they are most likely measured at normal load over 100,000 miles:

      Year Model/Optn Torque Capacity
      ---- ---------- ---------------
      1993 Manual/M28 360 lbs-ft
      1993 Manual/M29 400 lbs-ft
      1993 Auto/MX0 400 lbs-ft*

      1994 Manual/MN6 450 lbs-ft
      1994 Auto/MX0 400 lbs-ft*
      Note that the '95s and later have ratings that are the same as the '94s as nothing changed.

      *According to the GM Powertrain divison, the maximum torque the 4L60E transmission can handle is 350 lbs-ft of torque.
      Fred

      381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor

      Comment


      • #4
        I stand in aww of your manual cataloging ability
        1967 VW Bug 2.3L Ford SVO Inline 4 w/ Turbo, Sand-Drag VW Trans Axle, Race this Import.
        2001 Dodge Ram 1500 Totally Stock

        Comment


        • #5
          Squat......check your private messages.

          Comment


          • #6
            Originally posted by Squat13
            I stand in aww of your manual cataloging ability
            the man knows his stuff.

            The Goldens: Reno and Rocky

            2008 C6, M6, LS3, Corsa Extreme C/B, (it flys) & 2008 Yukon loaded (Titanic), 03 Ford Focus..everydaydriver.

            Wolfdog Rescue Resources, Inc.:http://www.wrr-inc.org
            Home Page: http://www.renokeo.com
            sold: 97 Firehawk, 97 Comp T/A, 2005 GTO, 2008 Solstice GXP turbo.

            Comment

            Working...
            X