Announcement

Collapse
No announcement yet.

Looking for carpet for F-body without rear seats...w/in

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for carpet for F-body without rear seats...w/in

    I've seen several pictures of cars that have rollcages and have opted to remove the rear seat that has carpet that makes it appear to be nice and flat where the seats would bolt in the back. Can anyone provide me with a link or business that sells these carpet kits?

    I've been searching for a while and came up with squat.


    Thanks!!!



    KnightFire
    1993 Formula Firebird
    Check Homepage for mods and photos...

    KnightFire's Lair


    Amsoil Dealer

  • #2
    you might try

    http://www.paddockparts.com/

    Not sure but they can do custom work I beleive or get someone who can help you. They have always been very helpful to me with both my ragtop and my 92RS
    2000 Z-28 Convertible, neutral leather interior and neutral top, hotchkis STB, SLP Bowtie Grill, WhisperLid, K&N, cold air induction

    Comment


    • #3
      You are aware that the back is fully carpeted, except for the holes for the seat belt bolts, the tabs that the seat back bolt to, and a 2" x 8" flap over the bracket that the front of the seat bottoms bolt to??? I just leave the stock floor mats over the flap.

      Fred

      381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor

      Comment


      • #4
        Yah, fully aware that its completely carpeted, I'm looking for a finished look though...thanks for the idea Fred!


        I'm gonna see if http://www.paddockparts.com/ has something for me Thanks RagTop



        KnightFire
        1993 Formula Firebird
        Check Homepage for mods and photos...

        KnightFire's Lair


        Amsoil Dealer

        Comment


        • #5
          Have you seen John LeBlanc's Z28?

          He's with MBA, so there's quite a bit of billet stuff inside, but he has a lift up cover over the rear seat area, with all his nitrous stuff underneath it. When you do something like that, you will not end up with any significant weight savings, though.

          Fred

          381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor

          Comment

          Working...
          X