Another suspension question.

[raroZ28]

I'm lowering my car. A guy named TandA on this board has a pic of his car in his sig



And he's using the Eibach pro kit, so that's probably what I'll get.

I know I need the adjustable panhard rod for these.

Do I need an adjustable torque arm? Do I need Control arm relocation brackets?

[Joe 1320]

Do I need an adjustable torque arm?

Yes, if you want to hook instead of spin.

Do I need Control arm relocation brackets?

yes, for the same reason as above.

[raroZ28]

Thanks Joe

[Jay 02 TA ws6]

Thanks Joe

Aren't you considering exhaust mods like headers and y-pipe?

May want to re-consider this if you are...

[Joe 1320]

Aren't you considering exhaust mods like headers and y-pipe?

May want to re-consider this if you are...

Lowering and long tubes seldom mix. Good point.

[raroZ28]

I was going to go with mid length headers.

[raroZ28]

Also... Do I need the adjustable control arms, or will the Non adj. arms work just as well for a lowered car?

[Joe 1320]

Also... Do I need the adjustable control arms, or will the Non adj. arms work just as well for a lowered car?

Non adjustable will work just fine, unless you need to alter the thrust angle.... then you'll need adjustable.

[raroZ28]

Thanks again, Joe.

[Jeff_in_Atl]

You should consider these too. http://www.stealthperf.com/cgi-bin/store/3301011.html