Announcement

Collapse
No announcement yet.

T-Top plastic trim?? Quick question.

Collapse
X
Collapse
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous Next
  • #1

    T-Top plastic trim?? Quick question.

    Anyone know where I can get the trim that goes on the T-Top? The plastic piece around the handle that you pull to get it off? Looks like somebody tried stealin' mine. It's cracked all the way down the middle, and it moves around a lot when I drive, making noise. I don't need a whole new t-top, I just need to replace this piece.

    Anyone know how I can get it off or where I can find a replacement?
    97 Chevy 'Raro Z28 M6- Ported & Polished LT1 heads,beehives,1.6/1.94 valves, 226/231 custom cam,K&N FIPK, 94-95 BBK shorty's,ORY,Magnaflow Catback,no cats,BMR LCA Relocation Brackets,Lower Control Arms,Adjustable Panhard Bar,Eibach Pro Kit,SPEC Stage 1,Walbro 255 Fuel Pump,30LB Injectors,Pro 5.0,Short stick,MSD 8.5's,NGK TR55's,LT4KM

    01 Honda CBR600 F4i-Two bro's,Corbins,SS brake lines

    Tags: None
  • #2
    Generally, the part number is cast somewhere on the inside of the piece. It will have a suffix for the color. It is probably something you could find for reasonable cost and shipping at one of the junk yards that specializes in 4th Gen F-Bodys.
    Fred

    381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor

    Comment

    • #3
      any idea how it comes off? Do I have to remove the lock or lever?
      97 Chevy 'Raro Z28 M6- Ported & Polished LT1 heads,beehives,1.6/1.94 valves, 226/231 custom cam,K&N FIPK, 94-95 BBK shorty's,ORY,Magnaflow Catback,no cats,BMR LCA Relocation Brackets,Lower Control Arms,Adjustable Panhard Bar,Eibach Pro Kit,SPEC Stage 1,Walbro 255 Fuel Pump,30LB Injectors,Pro 5.0,Short stick,MSD 8.5's,NGK TR55's,LT4KM

      01 Honda CBR600 F4i-Two bro's,Corbins,SS brake lines

      Comment

      • #4
        As I recall, you just remove the screws that hold it on.... not necessary to remove the lever. I had mine apart when the lock fell out and hit me on the head..... the lock suffered no damage
        Fred

        381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor

        Comment

        • #5
          Originally posted by Injuneer
          As I recall, you just remove the screws that hold it on.... not necessary to remove the lever. I had mine apart when the lock fell out and hit me on the head..... the lock suffered no damage
          Any damage to your dome?
          Tracy
          2002 C5 M6 Convertible
          1994 Z28 M6 Convertible
          Current Mods:
          SLP Ultra-Z functional ramair, SS Spoiler, STB, SFCs, Headers, Clutch, Bilstein Shocks, and TB Airfoil. 17x9 SS rims with Goodyear tires, 160F T-Stat, MSD Blaster Coil, Taylor wires, Hurst billet shifter, Borla catback with QTP e-cutout, Tuned PCM, 1LE Swaybars, 1LE driveshaft, ES bushings, White gauges, C5 front brakes, !CAGS, Bose/Soundstream audio, CST leather interior, synthetic fluids

          Comment

          Previous Next
          Working...
          X