Hi guys,
my wife's 97' TA has some trany problems.
last nigth on the track and a WOT , when was time for the 3 rd get in, the "service engine soon comes on" and RPM's begins to fall.
I reset the pcm and the light comes off, but I raced it again and the problem returns.
the scanner gives me code : p1860 TCC PWM Solenoid Circuit - Electrical.
default action:*DTC P1860 will be stored in PCM history
*Inhibit TCC engagement
*Inhibit 4th gear if in hot mode
*Freeze 1-2 shift adapts from being updated
If I set the shifter on 3 rd gear, it works fine, but in automatic mode it dont work as should be.
what can I do?
any experience whit this kind of problems?
sorry for my bad english.
my wife's 97' TA has some trany problems.
last nigth on the track and a WOT , when was time for the 3 rd get in, the "service engine soon comes on" and RPM's begins to fall.
I reset the pcm and the light comes off, but I raced it again and the problem returns.
the scanner gives me code : p1860 TCC PWM Solenoid Circuit - Electrical.
default action:*DTC P1860 will be stored in PCM history
*Inhibit TCC engagement
*Inhibit 4th gear if in hot mode
*Freeze 1-2 shift adapts from being updated
If I set the shifter on 3 rd gear, it works fine, but in automatic mode it dont work as should be.
what can I do?
any experience whit this kind of problems?
sorry for my bad english.
Comment