I am not sure about an 87 305 in a pontiac but I have a 91 GMC truck with a 305 TBI and the timing is 0 degrees TDC (top dead center). With every car I buy I always go to Auto Zone or PepBoys, etc., and buy a Haynes Repair Manual. They are a life saver sometimes. Hope this helps.
----------------------------------------------
2002 Z28 M6
Hurst shifter
No Mods Yet
A stock 305TBI (aka LO3) should be set at 0 degrees. This is because the factory cam has 4 degrees of initial advance in it already. Sounds weird, but it works. If you have an aftermarket cam, your mileage may vary. Hope that helps
Comment