Announcement

Collapse
No announcement yet.

need suspension help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • need suspension help

    Hi I need help........
    I recently put my car up over a curb and backwards!? Now the drivers side is sitting lower to the ground and I have a wobble in the wheel when I drive. I know the front stabalizer is bent but i'm wondering what else I should look for. Any advise would be helpful.
    Thanks
    P.S. it's a 93 Z-28

  • #2
    Get the car taken to a good alignment shop and have them check over the suspension components and specs while it's on the rack. You may have bent a control arm, steering arm, the steering knuckle, or something else. They can check the SAI and Included Angle to verify if anything is bent. Plus, if you hit a curb that hard you need the car re-aligned anyway.
    - Polo Green 1993 Formula 6-Speed
    - Moroso Intake, Hooker Catback, 3.42s, MSD Digital 6, Pro 5.0, TB Bypass, Lakewood Rear Control Arms, Torque Arms & Mounts, 2000 SS Brakes, C5 Vette Wheels, Koni Adjustables, Hooker Super Comp LTs (not installed... yet.)
    - 13.6 with just gears and exhaust

    Comment


    • #3
      thanx will do

      Comment

      Working...
      X