Announcement

Collapse
No announcement yet.

Got my car tuned well, sound clip - mini muscle car :)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Got my car tuned well, sound clip - mini muscle car :)

    hahaa.. ok, well, I think it sounds like it

    The sound is 272/272 cams, 3" turbo-back exhaust, big 16g turbo, etc.

    http://www.cousinlarry.com/upload2/dsmcamidle.mp3
    (If you use WinAmp and it doesn't work, try with windows media player..)

    Got the car tuned well, no knock, 22 psi daily. Fixed 3 - count 'em - three big boost leaks. The intercooler was leaking, EVERY injector's o-ring was busted, and the throttle shaft seals were dead. Fixed the manifold leak, set the timing to where it should be (it was off by a lot), changed an axle, replaced tranny/transfer case with redline fluids, rear diff too, EGT probe/gauge in, replaced the rear seats, new brakes/rotors all around, and more crap i'm forgetting.. I basically overhauled the car without opening the motor up.

    All those old problems got me a 12.8 @ ~105.. My goal for this spring is looowww 12's/high 11's and keeping it as stock looking as possible. I've been toying the idea of a front mount though so I'm not sure how the whole stock thng will work Oh and keeping it as my daily driver

    Anyways, just wanted to post the clip and the update. I know a couple people on here are DSM fans
    99 SS, MTI Lid, 3.90 gears, Hurst shifter, DMH 3" e-cutout

  • #2
    How's your idle with the 272's and a tune? You using DSM link?
    96 Camaro Z28/A4,Vortech elbow,Moroso CAI,Flowmaster.Addco PHR,LCA,160* Stat,pcmforless,1LE Driveshaft,1LE A/C delete pulley,1LE Front sway bar,Strut brace,sub frames, LT4 knock module,255 lph pump,Cutout,

    Comment


    • #3


      do it FMC
      2009 Honda Civic EX- the daily beater

      old toys - 1983 trans am, 1988 trans am, 1986 IROC-Z, 2002 Ram Off-Road, 1984 K10, 1988 Mustang GT, 2006 Silverado 2500HD

      Comment


      • #4
        Ahh, never mind.I heard the clip. Not bad idle at all with those cams. I think a buschur front mount would be in order. good luck....
        96 Camaro Z28/A4,Vortech elbow,Moroso CAI,Flowmaster.Addco PHR,LCA,160* Stat,pcmforless,1LE Driveshaft,1LE A/C delete pulley,1LE Front sway bar,Strut brace,sub frames, LT4 knock module,255 lph pump,Cutout,

        Comment


        • #5
          That front mount would look sweet on the wifes jetta.
          96 Camaro Z28/A4,Vortech elbow,Moroso CAI,Flowmaster.Addco PHR,LCA,160* Stat,pcmforless,1LE Driveshaft,1LE A/C delete pulley,1LE Front sway bar,Strut brace,sub frames, LT4 knock module,255 lph pump,Cutout,

          Comment


          • #6
            Idle's not too bad. Every once in a while i'll have to adjust the idle screw, but I think that issue's more the idle screw coming lose..

            Either way, I love it. And nothing says "Don't mess with me" more than a de-badged 1G DSM with a lopey cam
            99 SS, MTI Lid, 3.90 gears, Hurst shifter, DMH 3" e-cutout

            Comment

            Working...
            X