My car has gotten hot a couple of times while setting in traffic. I realized that I didn't hear the fan running. All 3 relays are good. I discovered a problem at the relay/fuse panel. According to the Haynes manual, pin 1 should be hot all the time and pin 5 hot only with the ignition switch in run. Here is what I measured on my car:
Relay 1 pin 1 = 12.7 pin 5 = 12.7
Relay 2 pin 1 = 0 pin 5 = 12.7
Relay 3 pin 1 = 0 pin 5 = 12.7
Turning on the ignition s/w didn't change any readings. What should I check next? Any ideas or help will be appreciated.
Thanks
Relay 1 pin 1 = 12.7 pin 5 = 12.7
Relay 2 pin 1 = 0 pin 5 = 12.7
Relay 3 pin 1 = 0 pin 5 = 12.7
Turning on the ignition s/w didn't change any readings. What should I check next? Any ideas or help will be appreciated.
Thanks
Comment