ok when i was installing my 02 sensors i bent my oil pressure sender unit thingy and it broke off... im not sure what to do now.. its not leaking or anything it broke off flush with the part above the filter it is old and brittle so thats why im guessing it broke off..... so im not sure on what to do now.. is it fixable.. any Clue?!? any help PLeasE
Announcement
Collapse
No announcement yet.
Broke Somthin.....
Collapse
X
-
fastTa
Originally posted by 94T/A GTok when i was installing my 02 sensors i bent my oil pressure sender unit thingy and it broke off... im not sure what to do now.. its not leaking or anything it broke off flush with the part above the filter it is old and brittle so thats why im guessing it broke off..... so im not sure on what to do now.. is it fixable.. any Clue?!? any help PLeasE
Comment
-
I'm with Kevin...how did you break your oil pressure sending unit? Can you post a pic of what you've broken? Maybe its something else. The oil pressure sending unit is located on the back of the manifold it would be hard to break changing 02's.1994 Firebird Formula, M6, Fan switch, 160 thermostat, Pacesetter LT headers, Morosso CAI, TB bypass, True duals.
Comment
-
The sensor is 1 1/16". You can get a special deep well socket for it. A regular deep well socket is not deep enough. You might not need it if it's on the side of the motor. I don't know. (Note the note in the picture) Thanks for the picture Rob.
2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
He has a 94, and he mentions it being located near the filter. Possibly he has one of the "early" 94's that had the sending unit on the side of the block, above the filter like the 93's (reference the notes on Shoebox's picture).
If he can't get the old piec out, he might be able to relocate it to the top of the block.Fred
381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor
Comment
-
yea injuneer its right above the filter.. i know its it because my oil pressure gauge reads 80 and if i have the car on and push the little button inside it drops accordingly to the pressure i put on it.... like i said i broke it off with the threads in it.. i know it plastic so worse comes to worse ill just crack the old one and pull it out piece by piece...
Comment
Comment