Hey, I'm putting in a 3:42 rear end next week, what can I get to recalibrate the speedo? I can't afford HP tuners. Is there a computer box or something I can get for that? I have 3:08's now. 99 Firebird V6 A4
Announcement
Collapse
No announcement yet.
Speedo Calibration
Collapse
X
-
jessica2112Tags: None
-
Originally posted by jessica2112Hey, I'm putting in a 3:42 rear end next week, what can I get to recalibrate the speedo? I can't afford HP tuners. Is there a computer box or something I can get for that? I have 3:08's now. 99 Firebird V6 A4
Other than that, the only other thing I can think of is to go to a place (dealer, local shop, etc...) that could do it for you.
I'd suggestfor that extra $$$ to tune your computer properly as well as recalibrating your speedo...that way you get more out of it
Your only going from a 3.08 to a 3.42 anyways, your speedo should only be like 3% off or so (don't quote me on that though). Non the less, your speed won't be a lot off.
black 95 t/a, a4, beefed up tranny w/ higher stall converter, transgo shift kit, trans temp gauge, trans cooler, richmond 3.73's, loudmouth, hypertech programmer, 160 thermo, descreened maf, TB bypass and airfoil, trick flow intake elbow, underdrive pulleys, moroso cai, edelbrock panhard rod, bmr stb, slp sfc's, fiberglass firehawk hood, hawk pads, taylor wires, ngk plugs, royal purple fluids,...and hopefully more to come
-
jessica2112
Well, I have not heard of a hand held for a 99. Plus I have a V6 with an sc. I do have a PCM I bought on e-bay sitting in my closet. Could I send that out? Where too? Just tell them I (Next week install) have headers, and the sc that is already in? That's basically all the mods, till my rear end get's installed. Hey, what's this on line programming? I have a laptop, just don't make the process longer then an hour or so, then my batteries crap out. It's wireless, should make it to the parking lot...
Comment
-
Originally posted by jessica2112Well, I have not heard of a hand held for a 99. Plus I have a V6 with an sc. I do have a PCM I bought on e-bay sitting in my closet. Could I send that out? Where too? Just tell them I (Next week install) have headers, and the sc that is already in? That's basically all the mods, till my rear end get's installed. Hey, what's this on line programming? I have a laptop, just don't make the process longer then an hour or so, then my batteries crap out. It's wireless, should make it to the parking lot...
As far as on line programming is concerned, I believe it's MadZ28 that does that. On the home page for this site (F-body.com) there's a list of sponsors...he's one of them. Just click on the link and you'll be good. You do need an adapter cable though (forgot the name of the cable) to hook up your lap top to your diagnostic port under your dash (by your right knee when you drive). The cable I believe costs about 90 bucks. The good thing about this is you can get updates and change your PCM's tuning as you do more mods to your car. All of this depends on what type of program you sign up for though.black 95 t/a, a4, beefed up tranny w/ higher stall converter, transgo shift kit, trans temp gauge, trans cooler, richmond 3.73's, loudmouth, hypertech programmer, 160 thermo, descreened maf, TB bypass and airfoil, trick flow intake elbow, underdrive pulleys, moroso cai, edelbrock panhard rod, bmr stb, slp sfc's, fiberglass firehawk hood, hawk pads, taylor wires, ngk plugs, royal purple fluids,...and hopefully more to come
Comment
-
I've been thinking about this and I'm wondering if any mail order tuners will be able to tune her car. Yea they probably have tons of experience with V8 cars but how many V6s with a blower have they ever tuned. Maybe they have. The only way to know is ask them. However I bet it's very limited. I was just thinking that you might be a whole lot better off finding someone that can dyno tune it. There is a guy here in Atlanta that does it for about $100 for 3 pulls including tuning. They can fix the Speedo at the same time along with the fan temp settings.2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
The problem you will be faced with is that the GM program code for OBDII V6s hadn't been successfully decoded as of a year ago. That problem prevents alot of small town dyno tune fixes like what are available for the V8 cars. Maybe things have changed as of late, but haven't heard any news. I do believe a used Hypertech for V6 models can cover all the other things like speedo calibration, fan settings, etc..... you just can't do the tune for the blower. There are also a few companies that make a speedo calibrator, I'll see what I can dig up.
Comment
-
jessica2112
Hmmm, I'd have to take the vacation days I have to go up there. I'm trying to use 2 of the 5 I have- for next week to put the headers on, and install the rear end. If these yahoo's at work would get their s*** together, and give me the OK. It's being "discussed".
Comment
Comment