It is suddenly blowing warm. Any ideas of where I should start to check first. I bought a recharge can and I have the correct pressure(according to the guage on the can), but it still blows warm. I figured I should check the relay and fuse, so I swapped the Ac relay with one I know works and it still did not blow warm. The fuse was fine. I am not really sure how the compressor works, but shouldnt the center of the pulley(clutch I think) spin. If so, it doesn't. Does this mean I need to replace the compressor? If so, what is the best way, underneath or up top?
Hope this wasnt too confusing, just never worked on an AC system before.
Hope this wasnt too confusing, just never worked on an AC system before.
Comment