Announcement

Collapse
No announcement yet.

Zaino advise needed

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Zaino advise needed

    Ok so i recently purchased a 1998 Bright Rally Red SS with less than 21k on it The exterior and interior are perfect but i have seen all the pics of everyones cars who use zaino and it looks amazing and sounds the same from what i hear. I want to make sure i get everything i need when i order and do it corectly for the best results and i know many people here use it so i thought you could instruct me. First off what exactly do i need for my red ss i was thinking of oredring the total protection show car kit since i dont need any of the leather stuff. http://www.zainostore.com/Merchant2/...ory_Code=Zaino Also i know i should wash first with dawn and then clay but thats about it so what steps exactly should i take since alls i have ever done was wash and turtle wax on the old car?
    1994 Camaro Z28 Bolton's, stall, 275 nitto's - SOLD
    1998 Camaro SS looking for 120+MPH N/A

  • #2
    ken will tell you everything you need to know. If you want faster answers, try the search. I've seen people ask this question a million times, and ken always answers it. Try that out.
    97 Chevy 'Raro Z28 M6- Ported & Polished LT1 heads,beehives,1.6/1.94 valves, 226/231 custom cam,K&N FIPK, 94-95 BBK shorty's,ORY,Magnaflow Catback,no cats,BMR LCA Relocation Brackets,Lower Control Arms,Adjustable Panhard Bar,Eibach Pro Kit,SPEC Stage 1,Walbro 255 Fuel Pump,30LB Injectors,Pro 5.0,Short stick,MSD 8.5's,NGK TR55's,LT4KM

    01 Honda CBR600 F4i-Two bro's,Corbins,SS brake lines

    Comment


    • #3
      The instructions on the Zaino site are pretty detailed. I think that their instructions follow the same theme that Ken provides.

      Comment


      • #4
        That is the kit I use, and it has everything you'll need.

        Start by washing with dawn, then clay bar it with a mild dawn solution. Rinse it and dry.

        Once it is dry mix up 1 vial of Z5 and ZFX. 1 vial will do the whole car twice. Apply it, wait 1/2 hour, remove it. Now wipe the whole car down with a 100% cotton towel and Z6 gloss enhancer. Now use the remainder of the vial to do a second coat of Z5 with ZFX. Allow it to dry 1/2 hour and remove it. Again, wipe down with Z6 afterwards.

        Now, do the same thing with the Z5 and ZFX again if necessary. Once you are satisfied the finish is perfect mix up a vial of Z2 and ZFX and do two coats of that just like you did the Z5. Dont forget to use the Z6 between coats!

        You'll want to get some high quality 100% cotton microfiber towels, preferably open loop.
        Tracy
        2002 C5 M6 Convertible
        1994 Z28 M6 Convertible
        Current Mods:
        SLP Ultra-Z functional ramair, SS Spoiler, STB, SFCs, Headers, Clutch, Bilstein Shocks, and TB Airfoil. 17x9 SS rims with Goodyear tires, 160F T-Stat, MSD Blaster Coil, Taylor wires, Hurst billet shifter, Borla catback with QTP e-cutout, Tuned PCM, 1LE Swaybars, 1LE driveshaft, ES bushings, White gauges, C5 front brakes, !CAGS, Bose/Soundstream audio, CST leather interior, synthetic fluids

        Comment


        • #5
          Originally posted by ExtinctBird
          The instructions on the Zaino site are pretty detailed. I think that their instructions follow the same theme that Ken provides.
          Yup, great info on the products, their application and use, tips and tricks and FAQ's. It will answer ALOT of questions you might have.

          Kevin Villier 2002 SS #186 - 6M with Hurst and "short-stick", T-Tops, navy blue, chrome SS wheels, Bilstein suspension, SS grill, BMR STB, chrome-moly panhard rod and LCA's, SLP SFC's, PPC LT's w/ RT hi-flo cats and hi-flo Y, TEA Stage 1.5 5.3L heads, TR224 cam, ASP pulley, SLP loudmouth, Direct-Flo lid, Holley Power-Shot filter, Mallory polished MAF ends, 4.10 gears.

          Louisville, KY

          SSOA F02-0186
          KY F-Bodies Unlimited

          Comment

          Working...
          X