Well I'm looking for a cam for my current project. I'll give all the specs then I hope some of the Cam Savy will throw down some Ideas.
1970 350 4-bolt Block Bored .030 over W/ Roller conversion
New forged 400 crank
Forged connecting rods
Flat top two valve relief Forged Pistons
1987 Corvette Aluminum heads Ported 2.02/1.6 valves 5 angle valve grind
1.6 RR
Chromoly Push rods
Roller lifters
Super Ram Intake
30lb injectors
1 5/8 into 3" Headers
All ports and Gaskets are size matched
What I want is torque not top atainable HP. This is a street only car.
1970 350 4-bolt Block Bored .030 over W/ Roller conversion
New forged 400 crank
Forged connecting rods
Flat top two valve relief Forged Pistons
1987 Corvette Aluminum heads Ported 2.02/1.6 valves 5 angle valve grind
1.6 RR
Chromoly Push rods
Roller lifters
Super Ram Intake
30lb injectors
1 5/8 into 3" Headers
All ports and Gaskets are size matched
What I want is torque not top atainable HP. This is a street only car.
Comment