I have been having the issue with the pressure of my clutch dis-engaging properly. Insted of ripping my Tranny out again since I changed the clutch about 1 week ago, I was reading that people Drill out the Hydrolic line that comes from the Master cylinder to the Slave cylinder. Is this a recommended fix?
Announcement
Collapse
No announcement yet.
Trans "Drill Mod"- Good Idea?
Collapse
X
-
I have never heard of that one before.
I have heard that a lot of people with LS1 clutches have had a hard time getting the air bled out of them which causes the clutch to not release all the way.2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
-
Originally posted by Jeff 95 Z28I have heard that a lot of people with LS1 clutches have had a hard time getting the air bled out of them which causes the clutch to not release all the way.
Yeah I heard that the Line have a restricter on the end of the line thats connected to the master cylinder.
Drill Mod- Step #16Eddie
2000 M6 Trans Am
Tune+exhaust=344WHP
Comment
-
Here are the links.
overall article
http://www.installuniversity.com/ins...r_cylinder.htm
drill mod
http://www.installuniversity.com/ins...#16. Drill Mod
I have not seen that one. That is a good find because I have seen that come up before. Let us know how it works.2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
Amazing, I just finished the Mod, took about 2 hours but I'll tell you what, That clutch is like butter. Its like brand new. Was a little bit of a challenge but I managed. Thanks to my old man, he showed me how easy it is to bleed the Slave. But I recommend this mod very much. Any questions feel free.Eddie
2000 M6 Trans Am
Tune+exhaust=344WHP
Comment
-
That's good to hear. I'll have to remember this thread. That will be a "challange".2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
Comment