Is there anyway to make the ashtray open up more than it normally does? I have a 97 console with an auto tranny if that helps. Thanks!
Announcement
Collapse
No announcement yet.
Ashtray opening further?
Collapse
X
-
Mine broke last year. I was able to remove it from the upper console, but I was told by a couple dealers that you cannot buy this seperately and you must buy the upper console part, called the shift plate. This is the upper trim including the ash tray lid, cup holder, and the a/t shift plate (P, R, N, OD, etc.)
One place quoted me a price of 70 bucks. I've also tried watching ebay auctions and going to local junk yards but I cannot find it. I may have to bite the bullet and buy the new part in order to make it look whole again.
BruceBruce
01 Camaro
Comment
-
Originally posted by 01Y87Mine broke last year. I was able to remove it from the upper console, but I was told by a couple dealers that you cannot buy this seperately and you must buy the upper console part, called the shift plate. This is the upper trim including the ash tray lid, cup holder, and the a/t shift plate (P, R, N, OD, etc.)
One place quoted me a price of 70 bucks. I've also tried watching ebay auctions and going to local junk yards but I cannot find it. I may have to bite the bullet and buy the new part in order to make it look whole again.
Bruce
Comment
-
95 Z28 - K&N FIPK, Flowmaster cat-back, Edelbrock STB, UMI Perf SFC, Performabuilt Pro Street 4L60E, 2800 Stall, Hayden tranny cooler, CRT Intake elbow, LS1 DS, 2k C5 replicas, Toyo Proxes T1S 255/40/17(f) 285/40/18(r), slotted rotors w/ Axxis MM pads, 15% front/5% rear tint, 97+ Console upgrade, all oils now synthetic
Bought and to install: UMI Adj LCA, Adj Panhard, LCA relocation brackets, 96 SS Spoiler....Broken and to be fixed
Comment
-
Link to the whole 93-02 Camaro Parts Manual. http://www.z28.com/forum/showthread.php?p=31248895 Z28 - K&N FIPK, Flowmaster cat-back, Edelbrock STB, UMI Perf SFC, Performabuilt Pro Street 4L60E, 2800 Stall, Hayden tranny cooler, CRT Intake elbow, LS1 DS, 2k C5 replicas, Toyo Proxes T1S 255/40/17(f) 285/40/18(r), slotted rotors w/ Axxis MM pads, 15% front/5% rear tint, 97+ Console upgrade, all oils now synthetic
Bought and to install: UMI Adj LCA, Adj Panhard, LCA relocation brackets, 96 SS Spoiler....Broken and to be fixed
Comment
Comment