in any gear with a load, at a low rpm, when i get on the throttle, a noise comes from the shifter that sounds like a loose/broken washer jingle. anybody have experience in the past with a similar problem?
Announcement
Collapse
No announcement yet.
Noisey Shifter
Collapse
X
-
Is it an aftermarket shifter? They don't have any noise isolation and can get loud.
If it's the stock shifter, you can take the off the panel covering the tray by removing a couple screws in the storage bin. You can see if anything is loose.Joe K.
'11 BMW 328i
'10 Matrix S AWD
Previously: '89 Plymouth Sundance Turbo, '98 Camaro V6, '96 Camaro Z28, '99 Camaro Z28, '04 Grand Prix GTP
Comment
-
i dropped a penny down below the ash tray months ago, removed the console, found the penny and removed it.....and the problem has still been there. it is the stock shifter to my knowledge.
thanks
ps. i was thinking about getting a short shifter anyway....but its not too high on my priority list,so we will see what happens.
-Ryan-
1997 Pontiac Firerbird Formula LT1/T56
2006 Pontiac G6 GTP, 3.9L V6, 6-spd
Comment
Comment